Consolidation of Carbon Nanotube Reinforced Aluminum Matrix Composites by High-Pressure Torsion
نویسندگان
چکیده
منابع مشابه
Carbon nanotube reinforced metal matrix composites – a review
This review summarises the research work carried out in the field of carbon nanotube (CNT) metal matrix composites (MMCs). Much research has been undertaken in utilising CNTs as reinforcement for composite material. However, CNT-reinforced MMCs have received the least attention. These composites are being projected for use in structural applications for their high specific strength as well as f...
متن کاملFabrication of in situ TiC reinforced aluminum matrix composites
In the present work, the room and elevated temperature mechanical behavior of Al/TiC, high-strength Al-Si/TiC and the elevated temperature-resistant Al-Fe(-V-Si)/TiC composites has been evaluated. The microstructural characteristics of ingot metallurgy (IM) or rapid solidification (RS) Al-Si/TiC and Al-Fe(-V-Si)/TiC composites could be thought of as a combination of the related alloy matrix mic...
متن کاملTribological performance of Graphene/Carbon nanotube hybrid reinforced Al2O3 composites
Tribological performance of the hot-pressed pure Al2O3 and its composites containing various hybrid contents of graphene nanoplatelets (GNPs) and carbon nanotubes (CNTs) were investigated under different loading conditions using the ball-on-disc method. Benchmarked against the pure Al2O3, the composite reinforced with a 0.5 wt% GNP exhibited a 23% reduction in the friction coefficient along wit...
متن کاملMultiscale modeling of carbon nanotube reinforced polymer composites.
This article examines the effect of interfacial load transfer on the stress distribution in carbon nanotube/polymer composites through a stress analysis of the nanotube/matrix system. Both isostrain and isostress loading conditions are investigated. The nanotube is modeled by the molecular structural mechanics method at the atomistic level. The matrix is modeled by the finite element method, an...
متن کاملPreparation and characterization of carbon nanotube reinforced silicon nitride composites
Multiwall carbon nanotube (MWNT) reinforced silicon nitride ceramics matrix composites have been prepared. The hot isostatic press (HIP)-sintering method was used for composite processing. Bending strength and elastic modulus of MWNT-silicon nitride composites showed a considerable improvement compared to matrices with added carbon fiber, carbon black or graphite. However, the silicon nitride s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgical and Materials Transactions A
سال: 2014
ISSN: 1073-5623,1543-1940
DOI: 10.1007/s11661-014-2354-6