Constitutive modelling of composite laminates under uniaxial compression
نویسندگان
چکیده
منابع مشابه
Buckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression
Delamination is one of the most common failure modes in composite structures. In the case of in-plane compressional loading, delamination of a layered flat structure can cause a local buckling in delaminated area which subsequently affects the overall stiffness of the initial structure. This leads to an early failure of the overall structure. Moreover, with an increase in load, the delaminated ...
متن کاملRate dependent deformation of a silicon nanowire under uniaxial compression: Yielding, buckling and constitutive description
0927-0256/$ see front matter Crown Copyright 2 doi:10.1016/j.commatsci.2011.07.037 ⇑ Corresponding author. Address: Mechanical Engin of Mechanical and Manufacturing Engineering, The Un NSW 2052, Australia. Tel.: +61 2 9385 6078; fax: +61 E-mail address: [email protected] (L.C. This paper investigates the effect of compressive strain rate on the mechanical behaviour of single crystallin...
متن کاملDetermination of Damage Constitutive Behavior for Rock Salt Under Uniaxial Compression Condition with Acoustic Emission
The mechanical characteristics of rock salt have an important influence on the safety of the salt cavity. The acoustic emission (AE) technique was used to analyze the generation of microcracks in rock salt under uniaxial compression condition. By monitoring acoustic emission in whole process of stress strain curve under uniaxial compression test, the damage characteristic of rock salt is obtain...
متن کاملBuckling of Ge nanowires under uniaxial compression
Molecular dynamics simulations are performed to investigate the buckling properties of [100]-, [110]-, [111]-, and [112]-oriented single-crystalline germanium nanowires under uniaxial compression. The effects of simulation temperature, strain rate, and wire length on the buckling behaviour are investigated. The simulation results indicate that critical load clearly decreases with increasing tem...
متن کاملFailure Prediction of Stringer Stiffened Composite Panels with Impact Damage under Uniaxial Compression
The in-plane compressive behaviour of thin-skin stiffened composite panels with a stress concentrator in the form of an open hole or low velocity impact damage is examined analytically. A fracture mechanics model, developed initially to predict notched compressive strength, was applied to estimate the compression-after-impact strength of a stiffened panel; in the analysis the impact damage is r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chinese Journal of Aeronautics
سال: 2019
ISSN: 1000-9361
DOI: 10.1016/j.cja.2019.02.003