Contact Pressure Algorithm of Multi-Layer Interference Fit Considering Centrifugal Force and Temperature Gradient
نویسندگان
چکیده
منابع مشابه
Higher-order Turbulence Products of Velocity and Temperature for Adverse Pressure Gradient Boundary Layer Flows
Higher-order turbulent products of momentum and temperature are experimentally presented for heated boundary layers subjected to adverse pressure gradient (APG) and zero pressure gradient (ZPG) flows. Clauser’s equilibrium parameter, b, was set to 1.8 for APG case and 0 for ZPG case. The temperature difference between the heated wall and free stream was held constant at 12°C. Triple wire measur...
متن کاملMulti-Objective Optimization of PID Controller for Temperature Control in Centrifugal Machines Using Genetic Algorithm
The main aim of the study focuses on the optimizing the response of the PID controllers used typically for temperature control loop in centrifugal machines in sugar industry using soft-computing. The centrifugal machines are used for the filtering sugar and molasses and the whole process is carried out at a certain fixed temperature. Any alterations from the set-point will cause instability in ...
متن کاملThe ReactorAFM: non-contact atomic force microscope operating under high-pressure and high-temperature catalytic conditions.
An Atomic Force Microscope (AFM) has been integrated in a miniature high-pressure flow reactor for in-situ observations of heterogeneous catalytic reactions under conditions similar to those of industrial processes. The AFM can image model catalysts such as those consisting of metal nanoparticles on flat oxide supports in a gas atmosphere up to 6 bar and at a temperature up to 600 K, while the ...
متن کاملA New Temper Rolling Force Model for Dry Thick Strip Considering Fully Elastic Contact
Temper rolling or skin pass rolling is one of cold rolling processes composed of a horizontal pass cold rolling mill stand. In this process, the thick strip is subjected to very light reduction (0.5–4%) in thickness in the presence of high friction amplitudes. One of the basic parameters of strip rolling processes is temper rolling force. A new rolling force model has been proposed for temper r...
متن کاملEffect of Contact Pressure and Frequency on Contact Heat Transfer Between Exhaust Valve and its Seat
The hot gases produced by the internal combustion engines passes through the exhaust valve and causes high temperatures in the exhaust valve and its seat. To avoid damaging the exhaust valve, heat must be transferred from the valve to its seat during the contact they make at the opening and closing cycle. Heat transfer rate from the exhaust valve to its seat is a function of many factors. One o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Sciences
سال: 2018
ISSN: 2076-3417
DOI: 10.3390/app8050726