Contamination of water samples during collection (note)

Contamination risk of stable isotope samples during milling.

RATIONALE Isotope analysis of wood is an important tool in dendrochronology and ecophysiology. Prior to mass spectrometry analysis, wood must be homogenized, and a convenient method involves a ball mill capable of milling samples directly in sample tubes. However, sample-tube plastic can contaminate wood during milling, which could lead to biological misinterpretations. METHODS We tested poss...

Risk factors for bacterial contamination during boar semen collection.

The aim of this study was to evaluate the influence of multiple factors on bacterial contamination in 213 ejaculates from four boar studs. Semen contamination by aerobic mesophiles increased in ejaculates where the preputial fluid flowed into the collection container, collection glove was dirty, preputial hair was long (>1.0 cm), the collection lasted >7 min and boars were older than 18 months....

Collection of samples of intestinal juices in infants and children with a new device avoiding contamination.

Faecal contamination of drinking water during collection and household storage: the need to extend protection to the point of use.

Paired water samples were collected and analysed for thermotolerant coliforms (TTC) from 20 sources (17 developed or rehabilitated by Oxfam and 3 others) and from the stored household water supplies of 100 households (5 from each source) in 13 towns and villages in the Kailahun District of Sierra Leone. In addition, the female head of the 85 households drawing water from Oxfam improved sources ...

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...