Control of an Industrial-type Multicomponent Crude Distillation Column using Biggest Log Modulus Tuning

Self-Tuning and Conventional Control of an Industrial Scale Packed Distillation Column

The performance of self-tuning and a variety of conventional control strategies are examined when applied to the overhead product composition control of a packed distillation column. These control strategies are tested under various sets of conditions on a packed distillation column situated B.P. Chemicals, South Wales, U.K. Conventional PID control action is employed throughout-being considere...

Multicomponent batch distillation column design

The Advanced Process Control System for an Industrial Distillation Column

The control problem of an industrial distillation column is studied. Just the top control loop is discussed in this paper. By means of data collected from the distributed control system (DCS), two soft sensors are first developed. Based on this work, an inferential control project was proposed, and an optimization framework added on it, to improve control performance further. This advanced proc...

Simulation and Control of an Aromatic Distillation Column

In general, the objective of distillation control is to maintain the desired products quality. In this paper, the performances of different one point control strategies for an aromatic distillation column have been compared through dynamic simulation. These methods are: a) Composition control using measured composition directly. This method sufferes from large sampling delay of measuring de...

Modeling and Control of an Industrial Distillation Plant Modeling and Control of an Industrial Distillation Plant

M and control of distillation columns is a research area that evokes considerable interest. On the one hand, substantial savings are possible with good controllers, on the other hand, distillation columns are often used as test cases for new methods of model based controller design. Strongly nonlinear behavior and high order are the characteristics that present challenges when designing control...