Control of evaporating complex fluids through electrowetting

Flow control of fluids through porous media

This paper discusses flow control of fluids through porous media, specifically related to its application in petroleum science. The flow of fluids is described by the Boussinesq equation with mixed boundary conditions; a Neumann boundary condition describes no flow at the outer boundary of the porous media and a nonlinear boundary condition describes the interaction between the porous media and...

Electrowetting control of bouncing jets

Characterization of electrowetting processes through force measurements.

A new method of characterizing electrowetting is presented. In this method, the electrowetting actuation forces are measured rather than the contact angle. The forces on the liquid are measured by trapping a droplet between a flat nanoindenter tip and the test substrate. When voltage is applied to electrodes in the substrate, lateral and normal forces are exerted on the tip and measured by the ...

Modeling Evaporating Droplets in Complex Unsteady Flows

In many applications, a moving fluid carries a suspension of droplets of a second phase which may change in size due to evaporation or condensation. Examples include liquid fuel drops in engines and raindrops or ice-crystals in a thunderstorm. If the number of such particles is very large, and, if further, the flow is inhomogeneous, unsteady or turbulent, it may be practically impossible to exp...

Microfluidic mixing through electrowetting-induced droplet oscillations