Control technology for water and drainage system.

فرآیند کنترل در سیستم کامپیوتری تهویه مطبوع ‏‎airwasher environmental control system for intelligent buildings‎‏

در این پایان نامه با استفاده از تکنولوژی روز و امکانات داخل کشور طریقه اتوماسیون سیستم تاسیساتی یک کارخانه نساجی (کارخانه نساجی اطلس پود) همراه با منوهای مربوطه و توضیحات کامل برنامه نویسی و طراحی بلوک های برنامه و سایر قسمتهای برنامه ارائه گشته است. علاوه بر این، برنامه با نمونه آمریکایی آن مقایسه و مزیت های آن نسبت به آمریکایی توضیح داده شده است. همچنین تمامی بلوک های برنامه بصورت شماتیکی بطو...

Hydraulic conductivity measurment for subsurface drainage system

Drainage water management for water quality protection

l and drainage has been central to the development of North America since colonial times, with the first organized drainage efforts occurring as early as the 1600s (Evans et al. 1996). Drainage has been encouraged to improve public highways, reduce public health risks, promote increased crop yield and reduced yield variability, reduce surface runoff and erosion, and increase land value. Agricul...

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

development and implementation of an optimized control strategy for induction machine in an electric vehicle

in the area of automotive engineering there is a tendency to more electrification of power train. in this work control of an induction machine for the application of electric vehicle is investigated. through the changing operating point of the machine, adapting the rotor magnetization current seems to be useful to increase the machines efficiency. in the literature there are many approaches wh...