Controlling factors of film-thickness in improved aerosol deposition method
نویسندگان
چکیده
منابع مشابه
LiNi0.4Co0.3Mn0.3O2 thin film electrode by aerosol deposition
LiNi0.4Co0.3Mn0.3O2 thin film electrodes are fabricated from LiNi0.4Co0.3Mn0.3O2 raw powder at room temperature without pretreatments using aerosol deposition that is much faster and easier than conventional methods such as vaporization, pulsed laser deposition, and sputtering. The LiNi0.4Co0.3Mn0.3O2 thin film is composed of fine grains maintaining the crystal structure of the LiNi0.4Co0.3Mn0....
متن کاملGasdynamic Simulation of Aerosol Deposition Method
The gas flow of aerosol deposition method (ADM) is simulated using the method of computational fluid dynamics (CFD), and the velocity of particles flowing in the gas flow is also calculated by numerically integrating Newton’s second law of motion. The process gas is nitrogen and the particle material is Pb(Zr,Ti)O3 (PZT). The calculated particle velocities are compared with experimental results...
متن کاملEffect of Film Thickness on the Piezoelectric Properties of Lead Zirconate Titanate Thick Films Fabricated by Aerosol Deposition
Lead zirconate titanate (PZT) thick films with uniformly dispersed submicrometer pores were successfully fabricated on platinized silicon substrates with various thicknesses ranging from 1 lm to over 100 lm by aerosol deposition. Mixed powders of PZT and polyvinylidene fluoride (PVDF) were deposited for initial fabrication of composite films. After burn-out of the PVDF phase from the composite ...
متن کاملinfluential factors of customer e-loyalty in iranian e-stores
گسترش سریع تکنولوژی و اینترنت مسیر شرکت ها را به نگهداری وفاداری مشتریان الکترونیکی معطوف کرده است. وفاداری مشتریان یک حوزه بسیار جالب برای شرکت ها می باشد و وفاداری مشتریان تاثیر مستقیم بر درآمد و سودزایی شرکتها دارد. با توجه به اهمیت وفاداری مشتری، ما به جستجوی سه مشکل اصلی تحقیق پرداختیم که آن ها مهمترین موانع برای حفظ حیات کسب و کارهای اینترنتی هستند که عبارت از تعویض های متعدد مشتری، هزینه...
15 صفحه اولControlling Thin Film Surface Morphology for Improved Light Trapping
This work demonstrates the use of feedback control, coupled with a suitable actuator design, in manufacturing thin films whose surface morphology is characterized by a desired visible light reflectance/transmittance level. The problem is particularly important in the context of thin film manufacturing for thin film solar cells where it is desirable to produce thin films with precisely tailored ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2009
ISSN: 1882-0743,1348-6535
DOI: 10.2109/jcersj2.117.868