Convection Inside Nanofluid Cavity with Mixed Partially Boundary Conditions
نویسندگان
چکیده
In recent decades, research utilizing numerical schemes dealing with fluid and nanoparticle interaction has been relatively intensive. It is known that CuO nanofluid a volume fraction of 0.1 special thermal boundary condition heat supplied to part the wall increases average Nusselt number for different aspect ratios ranges high Rayleigh numbers. Due its simplicity, stability, accuracy, efficiency, ease parallelization, we use single relaxation time Bhatnagar-Gross-Krook (SRT BGK) mesoscopic approach D2Q9 scheme lattice Boltzmann method in order solve coupled Navier–Stokes equations. Convection square enclosure moderate 105 new conditions highlighted. After successful validation simple partial Dirichlet condition, this paper extends study deal linear sinusoidal applied wall.
منابع مشابه
Numerical Simulation of Mixed Convection Flows in a Square Double Lid-Driven Cavity Partially Heated Using Nanofluid
A numerical study has been done through an Al2O3–water in a double lid-driven square cavity with various inclination angles and discrete heat sources. The top and right moving walls are at low temperature. Half of the left and bottom walls are insulated and the temperatures of the other half are kept at high. A large number of simulations for a wide range of Richardson number ...
متن کاملNumerical Study of Natural Convection in an Inclined Cavity with Partially Active Side Walls Filled with Cu-water Nanofluid
The buoyancy-driven fluid flow and heat transfer in a square cavity with partially active side walls filled with Cu-water nanofluid is investigated numerically. The active parts of the left and the right side-walls of the cavity are maintained at temperatures Th and Tc, respectively, with Th>Tc. The enclosure’s top and bottom walls, as well as, the inactive parts of its side walls are kept insu...
متن کاملNon-Darcian Mixed Convection Flow in Vertical Composite Channels with Hybrid Boundary Conditions
In this article, the effects of viscous dissipation and inertial force on the velocity and temperature distributions of the mixed convection laminar flow in a vertical channel partly filled with a saturated porous medium have been studied. In this regard, the Brinkman–Forchheimer extended Darcy model was adopted for the fluid flow in the porous region. In addition, three different viscous dissi...
متن کاملNumerical Investigation of Nanofluid Mixed Convection and Entropy Generation in an Inclined Ventilating Cavity
This paper presents results of a numerical study of mixed convection and entropy generation of Cu–water nanofluid in a square ventilating cavity at different inclination angles. Except a piece of bottom wall with a uniform heat flux, all of the cavity walls are insulated. The inlet port is placed at the bottom of the left wall and the outlet port is positioned at the top of the right wall....
متن کاملnumerical simulation of mixed convection flows in a square double lid-driven cavity partially heated using nanofluid
a numerical study has been done through an al2o3–water in a double lid-driven square cavity with various inclination angles and discrete heat sources. the top and right moving walls are at low temperature. half of the left and bottom walls are insulated and the temperatures of the other half are kept at high. a large number of simulations for a wide range of richardson number of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energies
سال: 2021
ISSN: ['1996-1073']
DOI: https://doi.org/10.3390/en14206448