Convenient Aluminizing Process of Steel by Using Al-Ti Mixed Powder Slurry
نویسندگان
چکیده
منابع مشابه
Optimization of Powder Mixed Electric Discharge Machining using ASTM A-105 Steel by Response Surface Methodology
The objective of this paper is to study the effect of the various process parameters i.e. peak current, noload voltage, pulse on time and duty cycle on response parameters by mixing silicon powder in the dielectric fluid of the Electric Discharge Machining (EDM). Response surface methodology (RSM) is used for investigating the effect on these parameters. Central composite design (CCD) is used f...
متن کاملThe Effect of Platinum Layer and Aluminizing Process on Surface Roughness of Coated Superalloy by Pt-Al
In this study, the effect of platinum-aluminide coating parameters on surface roughness of nickel-based superalloy Rene®80 was evaluated. For this purpose, different thicknesses of Pt-layer (2, 4, 6 and 8µm) were plated on the Samples. Then diffusion aluminide coating in two types, high tempeature-low activity and low temperature-high activity was performed. The results of structural investigat...
متن کاملB4C-Al Composites Fabricated by the Powder Metallurgy Process
Due to the large thermal neutron absorption cross section of 10B, B4C-Al composites have been used as neutron absorbing materials in nuclear industries, which can offer not only good neutron shielding performance but also excellent mechanical properties. The distribution of B4C particles affects the mechanical performance and efficiency of the thermal neutron absorption of the composite materia...
متن کاملDevelopment of Al-Ti-N Composite Coatings on Commercially Pure Ti Surface by Tungsten Inert Gas Process
The present work aims to modify surface properties of pure Ti by development of Ti-Al-N intermetallic composite coatings. In this regard, tungsten inert gas (TIG) cladding process was carried out using Al 1100 as filler rod with Ar and Ar+N2 as shielding gases. Phase and structure of the samples were investigated by X-ray diffraction (XRD) technique, optical microscopy (OM) and scanning electro...
متن کاملNeural Network Modeling of Oxidation Kinetics in Air of Steel- T21 Alloy Coated by Simultaneous Germanium-Doped Aluminizing-Siliconzing Process
In this work a pack cementation of germanium-doped aluminum and silicon coatings on low alloy steel type-T21 has been applied. This gives significant improvement in the oxidation. Steel-T21 was coated with germanium-doped aluminizing-siliconizing. Diffusion coating was carried out at 1050C for 6 h under an Ar atmosphere by simultaneous germanium-doped aluminizing-siliconzing process. Cyclic oxi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Korean Journal of Materials Research
سال: 2009
ISSN: 1225-0562
DOI: 10.3740/mrsk.2009.19.4.207