Coordinated Control of Networked AC/DC Microgrids With Adaptive Virtual Inertia and Governor-Gain for Stability Enhancement
نویسندگان
چکیده
This article proposes an adaptive coordinated control strategy for the networked AC/DC microgrids (MGs) to enhance frequency and dc voltage stability of system while keeping proper power sharing. First, a based on synchronverter virtual machine (VDCM) converters connecting AC DC MGs is proposed, which consisted governor inertia regulator besides sharing controller. Following, in order performance, parameter design approach governor-gain proposed accordingly, are comprehensively determined by and/or voltage, rotor speed, rate change (ROCOF) (ROCOV). After that, small-signal analysis with investigated guide selection parameters. Finally, simulation experimental results demonstrate that method improves frequency/dc nadir dynamic performance system.
منابع مشابه
Aalborg Universitet A Virtual Inertia Control Strategy for DC Microgrids Analogized with Virtual Synchronous Machines
In a DC microgrid (DC-MG), the dc bus voltage is vulnerable to power fluctuation derived from the intermittent distributed energy or local loads variation. In this paper, a virtual inertia control strategy for DC-MG through bidirectional grid-connected converters (BGCs) analogized with virtual synchronous machine (VSM) is proposed to enhance the inertia of the DC-MG, and to restrain the dc bus ...
متن کاملCoordinated Control of Doubley Fed Induction Generator Virtual Inertia and Power System Oscillation Damping Using Fuzzy Logic
Doubly-fed induction generator (DFIG) based wind turbines with traditional maximum power point tracking (MPPT) control provide no inertia response under system frequency events. Recently, the DFIG wind turbines have been equipped with virtual inertia controller (VIC) for supporting power system frequency stability. However, the conventional VICs with fixed gain have negative effects on inter-ar...
متن کاملDesigning a new robust control for virtual inertia control in the microgrid with regard to virtual damping
Background and Objectives: Virtual inertia control, as a component of a virtual synchronous generator, is used for the implementation of synchronous generator behaviour in microgrids. In microgrids that include high-capacity distributed generation resources, in addition to virtual inertia, virtual damping can also lead to improvement of frequency stability of the microgrid. The purpose of the c...
متن کاملFACTS Control Parameters Identification for Enhancement of Power System Stability
The aim of this paper is to investigate a novel approach for output feedback damping controller design ofSTATCOM in order to enhance the damping of power system low frequency oscillations (LFO). The design ofoutput feedback controller is considered as an optimization problem according with the time domain-basedobjective function which is solved by a honey bee mating optimization algorithm (HBMO...
متن کاملCommand Governor-Based Adaptive Control
Even though an important prerequisite for an adaptive controller is the ability to adapt fast in the face of large system uncertainties, fast adaptation with high-gain learning rates can be a serious limitation due to the fact that it can possibly yield to high-frequency oscillations especially during the transient system response. Therefore, achieving fast adaptation with low-gain learning rat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Energy Conversion
سال: 2021
ISSN: ['1558-0059', '0885-8969']
DOI: https://doi.org/10.1109/tec.2020.3011223