Copper (II) oxide thin film for methanol and ethanol sensing

Copper (II) oxide thin film for methanol and ethanol sensing

A nanostructured copper (II) oxide film deposited by reactive DC-magnetron sputtering technique, has been studied for static sensor response towards methanol and ethanol by operating temperature and analyte concentration modulations. The optimum operating temperature (Topt) for the sensing of methanol and ethanol is observed to be 350 ̊C and 400 ̊C, respectively. The maximum sensitivity observe...

Bile salt incorporated polypyrrole thin film for ethanol sensing.

Polypyrrole (PPy)-bile salt composite was used for sensing ethanol vapor. PPy was synthesized by interface polymerization for subsequent fabrication of thin film of its composite with bile salt, by in-situ co-dispersion method and then exposed to ethanol vapour. Sensing was visualized through changes in morphological, structural and optical characterizations. The ethanol exposed film showed lar...

Copper (II) Oxide Nanowires for p-type Conductometric NH3 Sensing

Synthesis of large-area and aligned copper oxide nanowires from copper thin film on silicon substrate

Large-area and aligned copper oxide nanowires have been synthesized by thermal annealing of copper thin films deposited onto silicon substrate. The effects of the film deposition method, annealing temperature, film thickness, annealing gas, and patterning by photolithography are systematically investigated. Long and aligned nanowires can only be formed within a narrow temperature range from 400...

Copper–titanium thin film interaction

Interaction between 5 lm thick copper and 50 nm thin titanium films was investigated as a function of annealing temperature and time using MeV He Rutherford backscattering, X-ray diffraction and dynamic Secondary Ion Mass Spectrometry. Samples were made by depositing 10 nm of titanium on a PECVD silicon oxynitride, followed by 50 nm of titanium nitride and 50 nm of titanium in the said order. I...