Correction: Electrowetting without external voltage using paint-on electrodes
نویسندگان
چکیده
منابع مشابه
Correction: Electrowetting without external voltage using paint-on electrodes.
Correction for 'Electrowetting without external voltage using paint-on electrodes' by Collin B. Eaker et al., Lab Chip, 2017, DOI: .
متن کاملElectrowetting films on parallel line electrodes.
A lubrication analysis is presented for the spreading dynamics of a high permittivity polar dielectric liquid drop due to an electric field sustained by parallel line electrode pairs separated by a distance R(e). The normal Maxwell stress, concentrated at the tip region near the apparent three-phase contact line, produces a negative capillary pressure that is responsible for pulling out a thin ...
متن کاملUltra-low voltage electrowetting using graphite surfaces.
The control of wetting behaviour underpins a variety of important applications from lubrication to microdroplet manipulation. Electrowetting is a powerful method to achieve external wetting control, by exploiting the potential-dependence of the liquid contact angle with respect to a solid substrate. Addition of a dielectric film to the surface of the substrate, which insulates the electrode fro...
متن کاملReversible ultralow-voltage liquid-liquid electrowetting without a dielectric layer.
Electrowetting-on-dielectric devices typically have operating voltages of 10-20 V. A reduction in the operating voltage could greatly reduce the energy consumption of these devices. Herein, fully reversible one-electrolyte electrowetting of a droplet on a solid metal surface is reported for the first time. A reversible change of 29° for an 800 mV step is achieved. The effects of surface roughne...
متن کاملLow Voltage Electrowetting-on-Dielectric Platform using Multi-Layer Insulators.
A low voltage, two-level-metal, and multi-layer insulator electrowetting-on-dielectric (EWD) platform is presented. Dispensing 300pl droplets from 140nl closed on-chip reservoirs was accomplished with as little as 11.4V solely through EWD forces, and the actuation threshold voltage was 7.2V with a 1Hz voltage switching rate between electrodes. EWD devices were fabricated with a multilayer insul...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Lab on a Chip
سال: 2017
ISSN: 1473-0197,1473-0189
DOI: 10.1039/c7lc90029e