Correction: Quantification of Dynamic Softening Kinetics of Duplex Stainless Steel Using Constituent Flow Stresses With Inverse Analysis
نویسندگان
چکیده
منابع مشابه
Kinetics of Sigma Phase Formation In a Duplex Stainless Steel
This work determines the kinetics of sigma phase formation in UNS S31803 Duplex Stainless Steel (DSS), describing the phase transformations that occur in isothermal aging between 700 and 900 °C for time periods up to 1032 hours, allowing the determination of the Time-Temperature-Precipitation (TTP) diagram for sigma phase and proposing a model to predict the kinetics of sigma phase formation us...
متن کاملDynamic recrystallization kinetics of AISI 403 stainless steel using hot compression test
In this work dynamic recrystallization behavior of AISI 403 martensitic stainless steel was studied using hot compression tests over temperature range of 900 C -1200 C and strain rate range of 0.001 s-1 - 1 s-1. The obtained flow curves showed that the hot compression behavior of the alloy is controlled by dynamic recrystallization. The flow stress and strain corresponding to the critical, pe...
متن کاملLoad Partitioning in a Duplex Stainless Steel with Surface Strength Gradient and Residual Stresses
The load partitioning between surface and bulk was studied by means of in-situ synchrotron energy dispersive diffraction in an SAF 2507 superduplex stainless steel having a strain hardened surface layer with compressive residual stresses. Two loading cycles with a peak tensile strain of 0.5% and 0.87%, respectively, were successively applied and the evolution of stresses in the respective const...
متن کاملdynamic recrystallization kinetics of aisi 403 stainless steel using hot compression test
in this work dynamic recrystallization behavior of aisi 403 martensitic stainless steel was studied using hot compression tests over temperature range of 900 c -1200 c and strain rate range of 0.001 s-1 - 1 s-1. the obtained flow curves showed that the hot compression behavior of the alloy is controlled by dynamic recrystallization. the flow stress and strain corresponding to the critical, pe...
متن کاملQuantitative analysis of thermo-mechanical behavior in 414 stainless steel using flow curves and processing maps
The hot deformation behavior of a typical martensitic stainless steel containing 2.1% Ni was investigated by means of the compression test in the strain rate range of 0.001-1 s-1 and temperature range of 950-1150 °C. The flow behavior of the steel was evaluated using the flow stress curves and flow softening map and by microstructural investigation. Taking into account of the strain effect on t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgical and Materials Transactions
سال: 2022
ISSN: ['1073-5623', '1543-1940']
DOI: https://doi.org/10.1007/s11661-022-06875-z