Correlation between forming quality and spatter dynamics in laser powder bed fusion
نویسندگان
چکیده
منابع مشابه
Spatter Tracking in Laser Machining
In laser drilling, an assist gas is often used to remove material from the drilling point. In order to design assist gas nozzles to minimize spatter formation, measurements of spatter trajectories are required. We apply computer vision methods to measure the 3D trajectories of spatter particles in a laser cutting event using a stereo camera configuration. We also propose a novel method for cali...
متن کاملStudy of the Microstructure and Cracking Mechanisms of Hastelloy X Produced by Laser Powder Bed Fusion
Hastelloy X (HX) is a Ni-based superalloy which suffers from high crack susceptibility during the laser powder bed fusion (LPBF) process. In this work, the microstructure of as-built HX samples was rigorously investigated to understand the main mechanisms leading to crack formation. The microstructural features of as-built HX samples consisted of very fine dendrite architectures with dimensions...
متن کاملLaser powder bed fusion of Ti-6Al-4V parts: Thermal modeling and mechanical implications
A continuum-scale modeling approach is developed and employed with three-dimensional finite element analysis (FEA), for simulating the temperature response of a Ti-6Al-4V, two-layered parallelepiped with dimensions of 10×5×0.06 mm during Laser Powder Bed Fusion (L-PBF), a metals additive manufacturing (AM) method. The model has been validated using experimental melt pool measurements from the l...
متن کاملFunctionalization of Biomedical Ti6Al4V via In Situ Alloying by Cu during Laser Powder Bed Fusion Manufacturing
The modern medical industry successfully utilizes Laser Powder Bed Fusion (LPBF) to manufacture complex custom implants. Ti6Al4V is one of the most commonly used biocompatible alloys. In surgery practice, infection at the bone-implant interface is one of the key reasons for implant failure. Therefore, advanced implants with biocompatibility and antibacterial properties are required. Modificatio...
متن کاملConsolidation phenomena in laser and powder-bed based layered manufacturing
Layered manufacturing (LM) is gaining ground for manufacturing prototypes (RP), tools (RT) and functional end products (RM). Laser and powder bed based manufacturing (i.e. selective laser sintering/melting or its variants) holds a special place within the variety of LM processes: no other LM techniques allow processing polymers, metals, ceramics as well as many types of composites. To do so, ho...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Additive Manufacturing
سال: 2020
ISSN: 2214-8604
DOI: 10.1016/j.addma.2019.100958