Corrosion Behavior of Fe, Cr, Ni and their Alloys in Sodium Molybdate Melts
نویسندگان
چکیده
منابع مشابه
Corrosion Performance of Fe-Cr-Ni Alloys in Artificial Saliva and Mouthwash Solution
Several austenitic stainless steels suitable for high temperature applications because of their high corrosion resistance and excellent mechanical properties were investigated as biomaterials for dental use. The steels were evaluated by electrochemical techniques such as potentiodynamic polarization curves, cyclic polarization curves, measurements of open circuit potential, and linear polarizat...
متن کاملCorrosion performance of Ni-Cr-Fe alloys in geothermal hypersaline brines
The early development of the Salton Sea geothermal resource proved that carbon steel tubulars do not provide satisfactory service life in the high-temperature, hypersaline brines. A large-scale corrosion test was designed to find the most cost-effective alloys for completing these wells. A series of Ni-Cr-Mo alloys were tested over several years in three production wells and two injection wells...
متن کاملThe Role of Alloying Elements on the Crevice Corrosion Behavior of Ni-Cr-Mo Alloys
The roles of the alloying elements Mo, Cr, and W in resisting crevice corrosion of UNS N06022, UNS N06625, and UNS N10362 have been studied under galvanostatic conditions in 5 mol/L NaCl at 150°C. Corrosion damage patterns were investigated using surface analytical techniques such as scanning electron microscopy and optical imaging, and the corrosion products characterized by energy dispersive ...
متن کاملCorrosion Performance of Ni-Based Alloys in Sodium Metavanadate
1 Universidad Autonoma del Estado de Morelos, CIICAp, Avenida Universidad 1001, 62209 Cuernavaca, MOR, Mexico 2 Instituto de Ciencias Fisicas, Universidad Nacional Autonoma de Mexico, Avenida Universidad s/n, 62210 Cuernavaca, MOR, Mexico 3 Facultad de Quımica, Universidad Nacional Autonoma de Mexico, 04510 Mexico, DF, Mexico 4 Corrosion y Proteccion, Buffon 46, 11590 Mexico, D.F., Mexico * E-m...
متن کاملMicrostructural Examination of Ni-ion Irradiated Fe-Ni-Cr Alloys Followed to Micro-zone Deformation
Examination of deformation microstructures induced by micro-indentation technique by means of transmission electron microscopy following an MV range metallic ion irradiation was performed in order to study the influence of irradiation-produced microstructural defects on plastic deformation behavior of materials. In this work, specimens of an Fe-Cr-Ni austenitic model ternary alloy before and af...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Atomic Energy Society of Japan
سال: 2013
ISSN: 1347-2879,2186-2931
DOI: 10.3327/taesj.j12.013