Corrosion Control for Mobil Marine Metallic Structures
نویسندگان
چکیده
منابع مشابه
Control of metallic corrosion through microbiological route.
Involvement of biofilm or microorganisms in corrosion processes is widely acknowledged. Although majority of the studies on microbiologically induced corrosion (MIC) have concentrated on aerobic/anaerobic bacteria. There are numerous aerobic bacteria, which could hinder the corrosion process. The microbiologically produced exopolymers provide the structural frame work for the biofilm. These pol...
متن کاملCorrosion in Concrete Structures with Permanent Deformation in Marine Environment
Concrete is usually highly alkaline (pH around 12), thus protecting reinforcement against corrosion. The occurrence of oxides is favored when the medium pH surrounding the bar is in values near to 9 or lower. Aggressive substances for reinforcements generally enter concrete through its pore structure, and cracks tend to decrease pH, stimulating corrosion process. There are several causes for cr...
متن کاملA corrosion model for bioabsorbable metallic stents.
In this study a numerical model is developed to predict the effects of corrosion on the mechanical integrity of bioabsorbable metallic stents. To calibrate the model, the effects of corrosion on the integrity of biodegradable metallic foils are assessed experimentally. In addition, the effects of mechanical loading on the corrosion behaviour of the foil samples are determined. A phenomenologica...
متن کاملMultilayer Nano Films for Corrosion Control
Nano films consisting of an alternating sequence of positively and negatively charged polyelectrolytes have been prepared by means of the electrostatic layer-by-layer (LBL) sequential assembly technique on treated and untreated mild steel wires. Inhibitor was encapsulated between cationic and anionic polyelectrolyte nano films. This paper mainly focuses on the effect of these nano-films of poly...
متن کاملwater treatment for corrosion control
certain gases, principally oxygen,o , and carbon dioxide, co , dissolved in water accelerate its corrosive properties. the rate of corrosion is approximately in prportion to the quantity of gas dissolved. the removal of gases from water, as practiced in steam station, is effected by mechanical and thermal treatment , by addition of chemicals, or by combinations of these processes, the most wide...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: CORROSION ENGINEERING
سال: 1981
ISSN: 0010-9355,1884-1155
DOI: 10.3323/jcorr1974.30.6_358