Corrosion of Pipe Steel in CO2 Containing Impurities and Possible Solutions
نویسندگان
چکیده
منابع مشابه
Corrosion behaviour of mild steel in aqueous acetic acid solutions containing different amounts of formic acid
The kinetics of mild steel corrosion in 20:0, 19:1, 18:2 and 15:5 (v/v%) aqueous mixture of acetic and formic acids has been investigated by weight loss and potentiostatic polarization techniques. The effects of composition of electrolyte and temperature on the corrosion rate of mild steel have been evaluated. The corrosion rate of mild steel increased linearly with temperature as well as amoun...
متن کاملStress Corrosion Cracking of an Austenitic Stainless Steel in Nitrite-Containing Chloride Solutions
This article describes the susceptibility of 316L stainless steel to stress corrosion cracking (SCC) in a nitrite-containing chloride solution. Slow strain rate testing (SSRT) in 30 wt. % MgCl₂ solution established SCC susceptibility, as evidenced by post-SSRT fractography. Addition of nitrite to the chloride solution, which is reported to have inhibitive influence on corrosion of stainless ste...
متن کاملMechanism of Localized Corrosion of Steel Pipe Pile Foundation for Offshore Wind Turbines and Corrosive Action
The wind turbine foundation serves as a permanent construction in the harsh marine corrosive environment, its anticorrosion design is essential to the safe use of the wind turbine structure. At present, there is a significant controversy over the local corrosion mechanism (such as pitting corrosion, and crevice corrosion) and its diffusion mechanism in the academic circle. In the paper, the Far...
متن کاملUse and Abuse of Eis in Studying the Mechanisms of Co2/h2s Corrosion of Mild Steel
Electrochemical Impedance Spectroscopy (EIS) is a powerful transient technique which enables an insight into the corrosion process not easily obtained by other predominantly DC techniques. However the EIS technique presents a large challenge both from a theoretical as well as an experimental point of view. Collecting accurate EIS raw data is not easy as EIS is plagues with errors not seen by th...
متن کاملA MODEL FOR CALCULATING RATES OF GENERAL CORROSION OF CARBON STEEL AND 13%Cr STAINLESS STEEL IN CO2/H2S ENVIRONMENTS
A model has been developed for calculating the rates of general corrosion of carbon steel and 13%Cr steel in aqueous systems containing carbon dioxide, hydrogen sulfide and other components. The model combines a comprehensive thermodynamic speciation module with electrochemical computations based on the mixed-potential theory. The electrochemical calculations recognize the effects of various pa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2013
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2013.06.201