Corrosion penetration monitoring of advanced ceramics in hot aqueous fluids
نویسندگان
چکیده
منابع مشابه
Hot Corrosion in Gas Turbines
DURING COMBUSTION in the gas turbine, sulfur from the fuel reacts with sodium chloride from ingested air at elevated temperatures to form sodium sulfate. The sodium sulfate then deposits on the hot-section components, such as nozzle guide vanes and rotor blades, resulting in accelerated oxidation (or sulfidation) attack. This is commonly referred to as “hot corrosion.” Sulfur in the fuel is gen...
متن کاملthe effect of aqueous extract of garlic on formalin-induced pain in male rats
چکیده اثر عصاره آبی سیر بر درد ناشی از آزمون فرمالین در موش صحرایی نر به کوشش نرگس اسکندری روزبهانی زمینه و هدف: گیاه سیر از خانواده لیلیاسه و گونهallium sativum بومی آسیای میانه بوده و از دوران ،باستان تاکنون به خواص درمانی متفاوت آن مثل: کاهندگی قندخون، کلسترول خون، فشار خون، اثرات مفیدآن بر دستگاه قلبی عروقی و بیماریهای انعقادی خون، اثرات آنتی اکسیداتیو، درمان بیماریهای تنفسی وگوارشی، ا...
15 صفحه اولCorrosion of Silicon-Based Ceramics in Combustion Environments
Silicon-based ceramics and composites are prime candidates for heat engine and heat exchanger structural components. In such applications these materials are exposed to combustion gases and deposit-forming corrodents. In this paper combustion environments are defined for various applications. These environments lead to five main types of corrosive degradation: passive oxidation, deposit-induced...
متن کاملCorrection: The Fabrication of Nano-Particles in aqueous solution from Oxyfluoride Glass Ceramics by Thermal Induction and Corrosion Treatment
An innovative route is reported to fabricate nano-particles in aqueous solution from oxyfluoride glass by the thermal induction and corrosion treatment in this letter. The investigations of X-ray diffraction and transmission electron microscope based on nano-particles in glass ceramics (GCs) and aqueous solution indicate that the nano-particles formed in glass matrix during the thermal inductio...
متن کاملRates of penetration of fixing fluids.
Measurements of the rate of penetration of fixing fluids obviously provide an empirical basis for the minimum timing of tissue fixation, and pioneer studies to this end have appeared in a European literature: Tellyesniczky ('lo, '26), Underhill ('32), Medawar ('41), Baker ('58). In addition, however, experimental studies on fixing fluid penetration contribute information on how the fluids act a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2004
ISSN: 1516-1439
DOI: 10.1590/s1516-14392004000100017