Corrosion problems and corrosion control. 2 Corrosion cracking of alloys.

Tarnish Resistance, Corrosion and Stress Corrosion Cracking of Gold Alloys

Tarnishing, corrosion and stress corrosion cracking (SeC) of gold alloys are related phenomena. They present problems when they occur in gold jewellery, dental gold alloys and electronic devices. They are exploited, however, in the depletion gilding and finishing of gold jewellery; and in the extraction, refining and fire assaying of gold. There is still much that is not known about these pheno...

Stress Corrosion Cracking

[Dental alloys and corrosion].

Jedan od osnovnih zahteva koji se postavlja za sve stomatološke materijale jeste da su neškodljivi za ljudski organizam i (primum non nocere) i zatim da ne deluju nadražajno ili toksičko na oralna tkiva i organizam u celini. Oni takođe moraju biti niske alergijske aktivnosti i bez štetnog delovanja na bolesnike i osoblje koje njima rukuje. Stomatološke nadoknade ostaju u ustima dug vremenski pe...

Corrosion-Induced Concrete Cracking Model Considering Corrosion-Filled Paste

A TCP–TCL model is established to describe the relationship between the thickness of the corrosion-filled paste (CP) and that of the corrosion layer (CL). This model can describe the phenomenon that the corrosion filling in the concrete pores and accumulating at the steel/concrete interface occur synchronously. Based on the TCP–TCL model, a corrosion-induced concrete cracking model, which can q...

Corrosion Product Film-Induced Stress Facilitates Stress Corrosion Cracking

Finite element analyses were conducted to clarify the role of corrosion product films (CPFs) in stress corrosion cracking (SCC). Flat and U-shaped edge-notched specimens were investigated in terms of the CPF-induced stress in the metallic substrate and the stress in the CPF. For a U-shaped edge-notched specimen, the stress field in front of the notch tip is affected by the Young's modulus of th...