Corrosion Rate Controlled by Mass-transfer

Monitoring Pipe-Wall Corrosion Rate by Ultrasonic Technique

thickness and corrosion/erosion rate. In this thesis, a combination of signal processing techniques are used to estimate the corrosion rate estimates based on MBE. Corrosion rate is estimated based on ultrasonic pipe wall thickness data is collected over a short period of time using MBE model. This technique is based on data collected from the speedometer applied for thinning and both indicate ...

Mass Transfer by Diffusion

Mass Transfer in a Closed Stirred Gas / Liquid Contactor Part 1 : The Mass Transfer Rate

Liquid phase mass transfer rates kLS for the absorption of oxygen in tap water and in aqueous ionic solutions have been determined in two closed stirred tank contactors for a power input between 3 and 70 W/kg and (impeller diameter)f(tank diameter) ratios DifT of 0.3, 0.35 and 0.4. The contactors had diameters of 0. I9 and 0.6 m. The dispersed phase fraction was 1% by volume in all experiments....

2. Wet Corrosion: Characteristics, Prevention and Corrosion Rate

2. Wet Corrosion: Characteristics, Prevention and Corrosion Rate