Could readily silanized silica particles substitute silica coating and silanization in conditioning zirconium dioxide for resin adhesion?
نویسندگان
چکیده
منابع مشابه
Effect of surface conditioning methods on the bond strength of luting cement to ceramics.
OBJECTIVES This study evaluated the effect of three different surface conditioning methods on the bond strength of a Bis-GMA based luting cement to six commercial dental ceramics. METHODS Six disc shaped ceramic specimens (glass ceramics, glass infiltrated alumina, glass infiltrated zirconium dioxide reinforced alumina) were used for each test group yielding a total number of 216 specimens. T...
متن کاملMicrotensile bond strength of a resin cement to glass infiltrated zirconia-reinforced ceramic: the effect of surface conditioning.
OBJECTIVES This study evaluated the effect of three surface conditioning methods on the microtensile bond strength of resin cement to a glass-infiltrated zirconia-reinforced alumina-based core ceramic. METHODS Thirty blocks (5 x 5 x 4 mm) of In-Ceram Zirconia ceramics (In-Ceram Zirconia-INC-ZR, VITA) were fabricated according to the manufacturer's instructions and duplicated in resin composit...
متن کاملEffects of silica coating and silane surface conditioning on the bond strength of rebonded metal and ceramic brackets
OBJECTIVE The aim of this study was to evaluate the effects of tribochemical silica coating and silane surface conditioning on the bond strength of rebonded metal and ceramic brackets. MATERIAL AND METHODS Twenty debonded metal and 20 debonded ceramic brackets were randomly assigned to receive one of the following surface treatments (n=10 for each group): (1) sandblasting (control); (2) tribo...
متن کاملEffect of silica particles on adhesion strength of polyvinyl chloride coatings on metal substrates
The aim of this study was to improve the adhesion performance of plasticized polyvinyl chloride (PVC) coatings on steel substrates by using nanoparticles. For this purpose, the PVC plastisol with different concentration of nano-silica was prepared and applied to bond steel joints. The adhesive strength of the joints was determined by single-lap shear test. Moreover, mechanical properties and mi...
متن کاملMarginal gap formation and fluoride release of resin-modified glass-ionomer cement: effect of silanized spherical silica filler addition.
The purpose of this study was to investigate the effects of silanized spherical silica fillers (SF) on the immediate and 24-hour marginal gaps of resin-modified glass-ionomer cement (RMGIC) in tooth cavities. In correlation with marginal gap formation in the tooth cavity, these influencing factors were also examined: marginal gap and setting shrinkage of cement in the Teflon mold, as well as th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Adhesion Science and Technology
سال: 2015
ISSN: 0169-4243,1568-5616
DOI: 10.1080/01694243.2015.1095628