Coupling behavior of shear deformation and end rotation of elastomeric seismic isolation bearings
نویسندگان
چکیده
منابع مشابه
Seismic Performance of seat-type bridges with elastomeric bearings
In Iran and some other countries, elastomer bearings in seat-type bridges are used with no sole/masonry plates and there is no positive connection between superstructure and substructure. Different codes have diverse provisions regarding the coefficient of friction (μ) between elastomer bearing and superstructure/substructure and also the design strength of shear keys (Vsk). Developing a finite...
متن کاملSeismic Risk Assessment of Optimally Designed Highway Bridge Isolated by Ordinary Unbounded Elastomeric Bearings
Recent experimental research has shown that ordinary unbounded steel reinforced elastomeric bearings (SREBs) can be considered as an attractive cost-effective option for the seismic isolation of highway bridges. To further investigate its benefits, the current study is focused on the seismic risk assessment of an optimally designed highway bridge isolated by SREB system. A typical three-span hi...
متن کاملSeismic Response of Standard Thermal Expansion Bridge Bearings
Elastomeric bridge bearings have a history of use in the USA of close to 50 years. They are capable of carrying large vertical loads and allowing horizontal movement with low lateral force due to the extreme flexibility of the elastomeric material. They require little maintenance, have no moving parts, have good longevity and are very economical. The elastomer in bridge bearings is usually eith...
متن کاملinvestigation of gassing behavior, electric and dielectric properties of different insulating fluids.
ترانسفورماتورهای قدرت از اجزای اصلی شبکه تامین انرژی الکتریکی می باشند که عملکرد قابل اطمینان ترانسفورماتورها یکی از فاکتورهای مهم و تعیین کننده در تامین انرژی الکتریکی محسوب می شود. در نتیجه بررسی و مانیتور عملکرد ترانسفورماتورها در شبکه و همچنین عیب یابی این ترانسفورماتورها غیرقابل اجتناب و ضروری می باشد. به طور کلی عایق های مایع در صنعت فشار قوی کاربردهای متفاوتی دارند که مهمترین وظیفه آنها...
15 صفحه اولCoupling grain boundary motion to shear deformation
Molecular dynamics (MD) simulations confirm that normal grain boundary (GB) motion must often be coupled to tangential translation of grains and will then produce shear deformation of the lattice traversed by the GB. Conversely, shear stresses applied to a GB can induce its normal motion. Using [001] symmetrical tilt GBs in copper as a model, the coupling factor b between the GB motion and grai...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Earthquake Engineering & Structural Dynamics
سال: 2016
ISSN: 0098-8847,1096-9845
DOI: 10.1002/eqe.2809