Coupon scale Z-pinned IM7/8552 delamination tests under dynamic loading
نویسندگان
چکیده
منابع مشابه
Mode II delamination toughness of z-pinned laminates
Mode II delamination toughness of z-pin reinforced composite laminates is investigated using finite element (FE) method. The z-pin pullout process is simulated by the deformation and breakage of non-linear springs. A critical shear stress criterion based on linear elastic fracture mechanics is used to simulate crack growth in an end-notched-flexure (ENF) beam made of z-pinned laminates. The mod...
متن کاملNumerical study on the mode I delamination toughness of z-pinned laminates
A finite element (FE) model is developed to investigate mode I delamination toughness of z-pin reinforced composite laminates. The z-pin pullout process is simulated by the deformation of a set of non-linear springs. A critical crack opening displacement (COD) criterion is used to simulate crack growth in a double-cantilever-beam (DCB) made of z-pinned laminates. The toughness of the structure ...
متن کاملAnalysis of mode I delamination of z-pinned composites using a non-dimensional analytical model
We present a non-dimensional analytical model for crack propagation in a z-pinned double cantilever beam specimen (DCB) under mode I loading. Effect of various design parameters on the crack bridging length and apparent fracture toughness are investigated using this model. The efficacy of the analytical model is evaluated by comparing the results with 3D finite element (FE) simulations of the D...
متن کاملExperimental study on effect of loading rate on mode I delamination of z-pin reinforced laminates
This paper presents an experimental investigation on mode I delamination of z-pinned double-cantilever-beams (DCB) and associate z-pin bridging mechanisms. Tests were performed with three types of samples: big-pin with an areal density of 2%, small-pin with an areal density of 2% and small-pin with an areal density of 0.5%. The loading rates for each type of samples were set at 1 mm/min and 100...
متن کاملAnalysis of Five Parameter Viscoelastic Model Under Dynamic Loading
The purpose of this paper is to analysis the viscoelastic models under dynamic loading. A five-parameter model is chosen for study exhibits elastic, viscous, and retarded elastic response to shearing stress. The viscoelastic specimen is chosen which closely approximates the actual behavior of a polymer. The module of elasticity and viscosity coefficients are assumed to be space dependent i.e. f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composites Part A: Applied Science and Manufacturing
سال: 2019
ISSN: 1359-835X
DOI: 10.1016/j.compositesa.2019.105565