Covariance Control of Turbomachinery Vibrations
نویسندگان
چکیده
منابع مشابه
Modelling and control of separation bubbles in transitional turbomachinery flows
In turbomachinery flows, the boundary-layer can remain laminar up to 70% of the chord length, due to a relatively low local Reynolds number on the blade. The high free-stream turbulence intensity penetrates into the laminar boundary-layer by the combined action of turbulence diffusion and pressure fluctuations, and triggers the transition process to a turbulent state. This transition process is...
متن کاملcontrol of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولSimulation of Active Control of Chatter Vibrations
. This paper outlines a strategy for the active control of the self-excited vibration of machine tools which arises when metal is turned, ground or milled. The requisite sensor and actuators for successful operation of such a scheme are outlined. Examples of the results of typical sensors are illustrated in a brief review of previous work. A simple single degree of freedom model of chatter is s...
متن کاملMultidisciplinary Optimization in Turbomachinery Design
This paper investigates particular aspects of performing multidisciplinary optimizations in different turbomachinery design steps. The differences in the optimization approaches and used methods in preliminary and final design steps are shown. An optimization environment is developed, which supports multidisciplinary turbomachinery design. The general concept and components are explained. Some ...
متن کاملTurbomachinery CFD on Parallel Computers
The role of multistage turbomachinery simulation in the development of propulsion system models is discussed. Particularly, the need for simulations with higher fidelity and faster turnaround time is highlighted. It is shown how such fast simulations can be used in engineering-oriented environments. The use of parallel processing to achieve the required turnaround times is discussed. Current wo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The International Journal of Acoustics and Vibration
سال: 2001
ISSN: 2415-1408
DOI: 10.20855/ijav.2001.6.383