Cover-layering a Porous Polyimide Flexible Print Circuit with a Porous Polyimide Layer
نویسندگان
چکیده
منابع مشابه
Fabrication of Polyimide Porous Nanostructures for Low-k Materials
The processing speeds of microchips continue to increase as integration densities increase in the semiconductor industry. When the device size is decreased, the so-called resistance– capacitance (RC) delay and the crosstalk noise between metal interconnects offset any gain in chip performance. To avoid these undesirable phenomena, lower dielectric insulating layers must be employed. In the near...
متن کاملDevelopment of polyimide flexible tactile sensor skin
We present the development of a polyimide-based two-dimensional tactile sensing array realized using a novel inverted fabrication technique. Thermal silicon oxide or Pyrex R © substrates are treated such that their surfaces are OH group terminated, allowing good adhesion between such substrates and a spun-on polyimide film during processing through what are suspected to be hydrogen bonds that c...
متن کاملFlexible GaN LED on a Polyimide Substrate for Display Applications
The flexible GaN-based light emitting diode (LED) has been fabricated on a plastic substrate for flexible display applications. The epitaxial structures of the GaN LED arrays are transferred onto a flexible substrate using standard soft lithography technology and connected to a source-meter by metal lines. To verify the mechanically and optically stable characteristics of the GaN LEDs on the fl...
متن کاملPorous field emission devices based on polyimide membranes using diode and triode configurations
Residual gas inside field emission displays ~FED! is the most important issue related to the device lifetime. Increasing the display area while maintaining the display thickness unchanged results in lifetime decrease, since the pressure gradient is fostered. Therefore, improvement of vacuum properties is a mandatory step towards large area displays. In a prior publication we have demonstrated t...
متن کاملTwo-Sided Comb Poly(amic ester)–Poly(propylene oxide) Graft Copolymers as Porous Polyimide Precursors
New step-growth graft block copolymers were synthesized. These two-sided comb copolymers consisted of a poly(amic ester) (PAE) backbone and pendant poly(propylene oxide) (PPO) grafts. The copolymers were made via a macromonomer approach, in which the 4,6-bischlorocarbonyl isophthalic acid bis[poly(propylene oxide)] ester macromonomer was synthesized through the reaction of hydroxyl-terminated P...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Photopolymer Science and Technology
سال: 2016
ISSN: 0914-9244,1349-6336
DOI: 10.2494/photopolymer.29.459