Cover Picture: Copolymerization of Divinylsilyl-11-silicotungstic Acid with Butyl Acrylate and Hexanediol Diacrylate: Synthesis of a Highly Proton-Conductive Membrane for Fuel-Cell Applications (ChemSusChem 3/2009)
نویسندگان
چکیده
منابع مشابه
Studies on the SPEEK membrane with low degree of sulfonation as a stable proton exchange membrane for fuel cell applications
Sulfonated poly (ether ether ketone) (SPEEK) with a low degree of sulfonation (DS = 40%) was prepared for proton exchange membrane fuel cells (PEMFC). Poly (ether ether ketone) (PEEK) was sulfonated in concentrated H2SO4 under N2 atmosphere and characterized by the hydrogen nuclear magnetic resonance (H-NMR) technique. After preparation of the SPEEK polymer, the obtained polymer was dissolved i...
متن کاملstudies on the speek membrane with low degree of sulfonation as a stable proton exchange membrane for fuel cell applications
sulfonated poly (ether ether ketone) (speek) with a low degree of sulfonation (ds = 40%) was prepared for proton exchange membrane fuel cells (pemfc). poly (ether ether ketone) (peek) was sulfonated in concentrated h2so4 under n2 atmosphere and characterized by the hydrogen nuclear magnetic resonance (h-nmr) technique. after preparation of the speek polymer, the obtained polymer was dissolved i...
متن کاملDynamic investigation of hydrocarbon proton exchange membrane Fuel Cell
Sulfonated polyether ether ketone (SPEEK) is categorized in a nonfluorinated aromatic hydrocarbon proton exchange membrane (PEM) group and considered as a suitable substitute for common per-fluorinated membranes, such as Nafion, due to wider operating temperature, less feed gas crossover, and lower cost. Since modeling results in a better understanding of a phenomenon, in this study a dynamic o...
متن کاملAn analytic model of membrane humidifier for proton exchange membrane fuel cell
An essential requirement for an operating PEM fuel cell is providing proper water content in the membrane. To avoid water flooding an appropriate water balance is required. Here, an analytic model of a planar membrane humidifier for PEM fuel cell is proposed where the effect of dimensional parameters includes membrane thickness, membrane area and channel hydraulic diameter are investigated. A N...
متن کاملIon track grafting: A way of producing low-cost and highly proton conductive membranes for fuel cell applications
Proton conductive individual channels through a PVDF matrix have been designed using the ion track grafting technique. The chosen polyelectrolyte, a sulfonated polystyrene (PSSA), has been radiografted all along the linear and cylindrical ion tracks of irradiated PVDF leading to the creation of privileged paths for proton conduction from the anode to the cathode without inducing any further por...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ChemSusChem
سال: 2009
ISSN: 1864-5631,1864-564X
DOI: 10.1002/cssc.200990008