Crack Corrosion Simulation of H62 Copper Alloy Coating Under Damage Condition
نویسندگان
چکیده
منابع مشابه
Crack Behavior of the Aluminum Alloy 2024 Under Fretting Conditions
The initial stage of fretting fatigue crack growth is significantly influenced by tangential force induced by fretting action along the contact surface where a mixed-mode crack growth is involved. Fretting crack behavior of aluminum alloy 2024 was studied, taking into account the problem of contact asperities. Finite element was used for the determination of the stress field near the contact su...
متن کاملCorrosion of Cold Spray Deposited Copper Coating on Steel Substrates
The corrosion behavior of copper cold spray coatings on a carbon steel substrate was compared to that of commercially available wrought copper under the conditions anticipated in a nuclear waste repository. Corrosion potential and linear polarization resistance measurements were conducted over 90 d to 120 d in 3.0 mol/L NaCl under anoxic (1) and oxygenated-toanoxic (2) conditions to simulate th...
متن کاملDeveloping of Corrosion Resistance Nano Copper Oxide Coating on Copper using Anodization in Oxalate solution
Copper alloys are widely used in the manufacturing of heat transfer applications, this due to their excellent heat transfer properties. Copper contamination is one of the serious industrial problems in the boiler feed water system. This contamination commonly resulted from copper corrosion reactions in boiler feed water environment. The best way to reduce the copper contamination is by improvin...
متن کاملExpansive Soil Crack Depth under Cumulative Damage
The crack developing depth is a key problem to slope stability of the expansive soil and its project governance and the crack appears under the roles of dry-wet cycle and gradually develops. It is believed from the analysis that, because of its own cohesion, the expansive soil will have a certain amount of deformation under pulling stress but without cracks. The soil body will crack only when t...
متن کاملElectrochemical Evaluation of Polyvinyl Butyral Coating Containing Polypyrrole/ZnO Nanocomposite for Corrosion protection of Al Alloy
In this work, polypyrrole/ZnO nanocomposite (PPy/ZnO NC) was produced through synthesis of polypyrrole polymer in the presence of ZnO nanoparticles. The corrosion behavior of polyvinyl butyral coatings without and with different weight percentages of nanocomposite on the surface of 7075 Al alloy was investigated in 3.5% NaCl solution at different immersion times using electrochemical impedance ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2020
ISSN: 1742-6588,1742-6596
DOI: 10.1088/1742-6596/1699/1/012032