Crack Detection and Corrosion Mapping Using Loaded-Aperture Microwave Probe

Design and fabrication of a high-Q near-field probe for subsurface crack detection

Non-destructive detection and evaluation of invisible cracks in metal structures is an important matter in several critical environments including ground transportation, air transportation and power plants. In this paper, a high-Q near-field Microwave probe is designed and fabricated using defected ground structures for surface and subsurface crack detection in metal structures. For this purpos...

Microwave and millimetre wave sensors for crack detection

Integration of Microwave and Thermographic NDT Methods for Corrosion Detection

Infrastructure health monitoring is an important issue in the transportation industry. For the case of cementbased structures in particular, detection of corrosion on reinforcing steel bars (rebar) is an ongoing problem for aging infrastructure. There have been a number of techniques that have shown promise in this area including microwave nondestructive testing (NDT) and thermography. Thermogr...

Coherent probe-pump-based Brillouin sensor for centimeter-crack detection.

We provide a theoretical explanation for a coherent probe-pump-based Brillouin sensor system that achieves centimeter spatial resolution with high-frequency resolution. It was recently discovered that, when a combination of cw and pulsed light (the probe beam) interacts with a cw laser (the pump beam), centimeter spatial resolution with high-frequency resolution can be achieved even though the ...

Wind Energy Mapping Using Synthetic Aperture Radar

Wind energy off-shore is gaining much interest due to the high wind power potentials. The need is to map wind climatology and regional wind patterns in coastal regions. In the WEMSAR (Wind Energy Mapping using Synthetic Aperture Radar) project three European sites will be covered near Norway, Denmark and Italy. Data to be used are from the ERS-2 C-band scatterometer with a 50 km resolution, fro...