Crack Growth Behavior through Wall Pipes under Impact Load and Hygrothremal Environment
نویسندگان
چکیده
منابع مشابه
Slow Crack Growth-Notches-Pressurized Polyethylene Pipes
A general method for predicting the life time of a polyethylene structure that fails by slow crack growth was applied to the case of externally notched pressurized pipes. An analysis of experimental data indicated that the residual stress must be taken into account. The critical notch depths associated with a given life time were calculated as a function of pipe size, PENT value of the resin an...
متن کاملload displacement behavior of concrete beam under monotonic static and low velocity impact load
experiments were carried out to observe the influence of loading type on concrete beam specimens. beam specimens made of similar concrete mixture with the same geometry were tested under three point static loading and low velocity drop weight impact loading. load – displacement behavior, absorbed energy dissipation capacity, stiffnesses, failure modes of beam specimens were obtained and discuss...
متن کاملCrack closure under high load-ratio conditions for Inconel-718 near threshold behavior
Fatigue-crack-growth (FCG) rate tests were conducted on compact specimens made of an Inconel-718 alloy to study the behavior over a wide range in load ratios (0.1 6 R 6 0.95) and a constant Kmax test condition. Previous research had indicated that high R (>0.7) and constant Kmax test conditions near threshold conditions were suspected to be crack-closure-free and that any differences were attri...
متن کاملCrack Behavior of the Aluminum Alloy 2024 Under Fretting Conditions
The initial stage of fretting fatigue crack growth is significantly influenced by tangential force induced by fretting action along the contact surface where a mixed-mode crack growth is involved. Fretting crack behavior of aluminum alloy 2024 was studied, taking into account the problem of contact asperities. Finite element was used for the determination of the stress field near the contact su...
متن کاملModeling of Vertical Breakwater Wall under Bilateral Seawater Load
Floating breakwaters are widely used due to their various advantages over stationary breakwaters. Lots of researches have been done on hydrodynamics and the type of bracing of these kinds of structures in recent years. In this study, numerical modeling of stresses caused by collision waves has been investigated. For this purpose, samples of floating breakwaters have been modeled in ANSYS softwa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Al-Khwarizmi Engineering Journal
سال: 2018
ISSN: 2312-0789,1818-1171
DOI: 10.22153/kej.2018.05.001