Crack Pattern of Lightweight Concrete under Compression and Tensile Test

Determination of Tensile Strength and Crack Growth of a Typical Polymer Concrete Using Circular Disc Samples

Cracked and un-cracked Brazilian disc specimens subjected to diametral compression were used for conducting fracture toughness and tensile strength experiments on a polymer concrete (PC) material. The value of mode I fracture toughness (KIc) was determined from the center- cracked Brazilian disc and the indirect tensile strength (σt) was obtained from the un-cracked Brazilian disc specimen. The...

Crack Growth and Lifetime of Concrete under Long Time Loading

Edge-notched eccentrically compressed fracture specimens made of aggregate of reduced size are loaded in standard creep test frames. Measurements of the time rate of crack mouth opening in notched concrete specimens subjected to constant load of almost one month duration are reported and analyzed. To reveal the size effect, geometrically similar specimens of four sizes in the ratio I :2:4:8 are...

determination of tensile strength and crack growth of a typical polymer concrete using circular disc samples

cracked and un-cracked brazilian disc specimens subjected to diametral compression were used for conducting fracture toughness and tensile strength experiments on a polymer concrete (pc) material. the value of mode i fracture toughness (kic) was determined from the center- cracked brazilian disc and the indirect tensile strength (σt) was obtained from the un-cracked brazilian disc specimen. the...

Damage Detection of Carbon Fiber-reinforced Concrete Under Bending Test

Prediction of Lightweight Aggregate Concrete Compressive Strength

Nowadays, the better performance of lightweight structures during earthquake has resulted in using lightweight concrete more than ever. However, determining the compressive strength of concrete used in these structures during their service through a none-destructive test is a popular and useful method.  One of the main methods of non-destructive testing in the assessment of compressive strength...