Cracking of titania nanocrystalline coatings
نویسندگان
چکیده
منابع مشابه
Nanocrystalline materials and coatings
In recent years, near-nano (submicron) and nanostructured materials have attracted increasingly more attention from the materials community. Nanocrystalline materials are characterized by a microstructural length or grain size of up to about 100 nm. Materials having grain size of 0.1 to 0.3 mm are classified as submicron materials. Nanocrystalline materials exhibit various shapes or forms, and ...
متن کاملThermally Stimulated Currents in Nanocrystalline Titania
A thorough study on the distribution of defect-related active energy levels has been performed on nanocrystalline TiO₂. Films have been deposited on thick-alumina printed circuit boards equipped with electrical contacts, heater and temperature sensors, to carry out a detailed thermally stimulated currents analysis on a wide temperature range (5-630 K), in view to evidence contributions from sha...
متن کاملCoupling of titania inverse opals to nanocrystalline titania layers in dye-sensitized solar cells.
We report a quantitative comparison of the photoaction spectra, short circuit current densities, and power conversion efficiencies of dye-sensitized solar cells (DSSCs) that contain bilayers of nanocrystalline TiO2 (nc-TiO2) and titania inverse opal photonic crystals (PCs). Cells were fabricated with PC/nc-TiO2 and nc-TiO2/PC bilayer films on glass/tin oxide anode of the cell, as well as in a s...
متن کاملStructural formation and photocatalytic activity of magnetron sputtered titania and doped-titania coatings.
Titania and doped-titania coatings can be deposited by a wide range of techniques; this paper will concentrate on magnetron sputtering techniques, including "conventional" reactive co-sputtering from multiple metal targets and the recently introduced high power impulse magnetron sputtering (HiPIMS). The latter has been shown to deliver a relatively low thermal flux to the substrate, whilst stil...
متن کاملMicrostructure, deformation and cracking characteristics of thermal spray ferrous coatings
The microstructure and local mechanical characteristics of thermal spray ferrous coatings have been determined. The emphasis has been on coatings made by the high velocity oxyfuel (HVOF) process, especially the role of Al alloy additives. The oxide phase present in the material and preferred pathways for local cracking and separation have been determined. Thin intersplat oxide layers emerge as ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the European Ceramic Society
سال: 2008
ISSN: 0955-2219
DOI: 10.1016/j.jeurceramsoc.2008.02.002