Cracking Propagation and Pattern Behaviour of Irregular-Shaped Polyethylene Terephthalate Fibre Reinforced Concrete Beam
نویسندگان
چکیده
منابع مشابه
Regression Models to Evaluate Compressive Strength of Polyethylene Terephthalate (PET) Fibre Reinforced Recycle Aggregate Concrete
-This paper presents the compressive strength of PET fibre reinforced recycles aggregate concrete. The Natural Aggregate (NC) was replaced by recycle aggregate (RA) in the proportion of 25, 50, 75 and 100%. PET fibres were added to the Recycle Aggregate Concrete (RAC) by 1 and 2% volume. Total 45 cubes were cast and tested. The results showed that as the % of RA and volume fraction of PET fibre...
متن کاملBehaviour of fibre reinforced concrete slabs
This paper presents a comparison of the properties of concrete slabs when two types of fibres are added. One specimen had no fibres and acted as a control specimen. The remaining four specimens had steel and polypropylene fibres added in the volumetric ratio of 0.5% and 1.0%. The dimensions of the slab specimens were 820×820×80 mm and were supported by four rollers at their edges. A displacemen...
متن کاملGlass Fibre Reinforced Concrete
Glass Fibre Reinforced Concrete is recent introduction in the field of concrete technology. The present day world is witnessing the construction of very challenging and difficult Civil Engineering Structures. Concrete being the most important and widely used material is called upon to possess very high strength and sufficient workability properties. Concrete the most widely used consrtuction ma...
متن کاملApplications and Properties of Fibre Reinforced Concrete
In conventional concrete, micro-cracks develop before structure is loaded because of drying shrinkage and other causes of volume change. When the structure is loaded, the micro cracks open up and propagate because of development of such micro-cracks, results in inelastic deformation in concrete. Fibre reinforced concrete (FRC) is cementing concrete reinforced mixture with more or less randomly ...
متن کاملInfluence of Fibre Content on Crack Propagation Rate in Fibre-Reinforced Concrete Beams
Experimental study on the influence of fibre content on crack behaviour and propagation in synthetic-fibre reinforced beams has been reported in this paper. The tensile behaviour of metallic fibre concrete is evaluated in terms of residual flexural tensile strength values determined from the load-crack mouth opening displacement curve or load-deflection curve obtained by applying a centre-point...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Mechanics and Materials
سال: 2015
ISSN: 1662-7482
DOI: 10.4028/www.scientific.net/amm.773-774.911