Creating movable interfaces by micro-powder injection moulding

Injection moulding temperature and powder loading influence to the metal injection moulding (MIM) green compact

1 UTM Razak School of Engineering and Advanced Technology, Universiti Teknologi Malaysia, International Campus, 54100 Kuala Lumpur, Malaysia. 2 Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia. 3 Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia. 4 Faculty of Me...

Micro-Injection Moulding of Polymer Microfluidic Devices

* Building 56, Cranfield University, Wharley End, Cranfield, Bedfordshire, MK43 0AL, UK. Tel: +44 (0)1234 750111 ext: 2513; E-mail: [email protected] a Building 56, Cranfield University, Wharley End, Cranfield, Bedfordshire, MK43 0AL, UK. Fax: +44 (0)1234 751346; Tel: +44 (0)1234 750111 ext: 2379; E-mail: [email protected] b Building 61, Cranfield University, Wharley End, Cranfield...

The effect of powder characteristics on pressure sensitivity of powder injection moulding compounds

Pressure effect on the rheological behaviour of powder-polymer compounds intended for powder injection moulding was determined. A single-piston capillary rheometer modified by addition of a second chamber with a restricting needle valve generating backpressure increasing the pressure in the melted material during the flow through the die was employed to determine pressure sensitivity coefficien...

Microporous Titanium through Metal Injection Moulding of Coarse Powder and Surface Modification by Plasma Oxidation

Titanium is one of the most attractive materials for biomedical applications due to having excellent biocompatibility accompanied by good corrosion resistance. One popular processing technique for Ti is Metal Injection Moulding (MIM). However, there are several issues associated with the use of this technique, such as the high cost of the fine powder used, the high level of contamination and co...

Injection moulding antireflective nanostructures