Critical heat flux for rod bundle under high-pressure, low-flow and mixed inlet conditions.
نویسندگان
چکیده
منابع مشابه
Critical Heat Flux Measurement and Model for Refrigerant-123 under Stabilized Flow Conditions in Microchannels
The present work is aimed toward understanding the effect of flow boiling stability on critical heat flux (CHF) with Refrigerant-123 (R-123) in microchannel passages. Experimental data and theoretical model to predict the CHF are the focus of this work. The experimental test section has six parallel microchannels with each having a cross sectional area of 1054 × 157 μm 2 . The effect of flow in...
متن کاملPhotographic study and modeling of critical heat flux in horizontal flow boiling with inlet vapor void
This study explores the mechanism of flow boiling critical heat flux (CHF) in a 2.5 mm 5 mm horizontal channel that is heated along its bottom 2.5 mmwall. Using FC-72 as working fluid, experiments were performed with mass velocities ranging from 185–1600 kg/ms. A key objective of this study is to assess the influence of inlet vapor void on CHF. This influence is examined with the aid of high-sp...
متن کاملPhotographic study of high-flux subcooled flow boiling and critical heat flux
This study examines both high-flux flow boiling and critical heat flux (CHF) under highly subcooled conditions using FC-72 as working fluid. Experiments were performed in a horizontal flow channel that was heated along its bottom wall. High-speed video imaging and photomicrographic techniques were used to capture interfacial features and reveal the sequence of events leading to CHF. At about 80...
متن کاملThe Effect of Linear Change of Tube Diameter on Subcooled Flow Boiling and Critical Heat Flux
One of the major industry problems is the flow boiling, where reaching to the critical heat flux (CHF) condition can lead to a temperature jump and damage of the systems. In the present study, the effects of a uniform change in tube diameter on subcooled flow boiling and CHF was numerically investigated. The Euler-Euler model was used to investigate the relationship between the two liquid and v...
متن کاملHigh flux boiling in low flow rate, low pressure drop mini-channel and micro-channel heat sinks
Due to the need for practical cooling technologies which could dissipate high heat fluxes, an experimental study of pressure drop and CHF in mini-channel (L) = 2.54 mm) and micro-channel (0 = 510 pm) heat sinks of 1 cm heated length was performed using R-l 13. Test conditions included inlet subcooling ranging from 10 to 32°C and a range of low flow rates up to a maximum of 95 ml min-‘. The test...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Nuclear Science and Technology
سال: 1988
ISSN: 1881-1248,0022-3131
DOI: 10.3327/jnst.25.207