Crystallization Control Using Injection Compression Molding. Part I. Crystallization Control of Polypropylene.
نویسندگان
چکیده
منابع مشابه
Precision Injection Molding PRECISION PROCESS CONTROL OF INJECTION MOLDING
1 INTRODUCTION The technical requirements of precision injection molded components demand a heightened level of process performance, and with corresponding process monitoring and control technologies. To obtain the desired critical to quality attributes (CTQs) of the molded products, the injection molding process must be consciously designed such that the key process variables (KPVs) are observ...
متن کاملInhibition effect of polyvinyl butyral on crystallization of polypropylene
In this work, a series of polypropylene/polyvinyl butyral (PP/PVB) blends were prepared by melt-blending process, at PVB loadings 3 wt%, 10 wt%, and 30 wt%. The effects of PVB on crystallization behavior of PP were investigated by differential scanning calorimetry (DSC), and polarized optical microscopy (POM). The isothermal crystallization kinetics were analyzed by Avrami equations. It was fou...
متن کاملExtensional-flow-induced crystallization of isotactic polypropylene
A filament stretching extensional rheometer with a custom-built oven was used to investigate the effect of uniaxial flow on the crystallization of polypropylene. Prior to stretching, samples were heated to a temperature well above the melt temperature to erase their thermal and mechanical histories and the Janeschitz-Kriegl protocol was applied. The samples were stretched at extension rates in ...
متن کاملHigh-pressure crystallization of isotactic polypropylene droplets
Dispersions of isotactic polypropylene (PP) particles in polystyrene (PS) were produced by interfacially driven breakup of nanolayers in multilayered systems that were fabricated by means of layer-multiplying coextrusion. The droplet size was controlled by the individual PP layer thickness ranging from 12 to 200 nm. In addition, PP was melt blended with PS to produce PP droplets larger than tho...
متن کاملOn-line Quality Control of Injection Molding Using Neural Networks
Plastics is one of the world’s largest and fastest growing industries, ranked as one of the few multi-billion dollar industries. Due to the vast improvements in polymers and production processes, plastics are now amongst the world’s most widely used materials, with the world consumption of polymers surpassing steel in volume and weight. Injection molding represents approximately 32% (by weight)...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Seikei-Kakou
سال: 1999
ISSN: 1883-7417,0915-4027
DOI: 10.4325/seikeikakou.11.856