Crystallization of glassy Fe40Ni40P14B6 alloy on heating and the melt amorphization during melt-spinning processing
نویسندگان
چکیده
منابع مشابه
Grafting of Acrylamide to Low Density Polyethylene During Melt Processing
Acrylamide was grafted in low density polyethylene during melt processing in the presence of a free radical initiator using a torque rheometer in a closed system. Effects of processing time, acrylamide and benzoyl peroxide concentrations were studied. FTIR studies revealed that the degree of grafting increased by an increase in acrylamide concentration. Maximum grafting was obtained at 7 mi...
متن کاملHeat Transfer during Melt Spinning of Al-7%si Alloy on a Cu-be Wheel
Transient heat transfer models of the single-wheel meltspinning process are developed and applied to quantify the effect of process variables including interface depressions on solidification, temperature evolution, thickness variations, and surface depressions in the cast product. Firstly, a transient one-dimensional heat-transfer model of the melt-spinning process called STRIP1D was developed...
متن کاملIsothermal Melt Crystallization Kinetic Behavior of Poly (vinylidene fluoride)
Isothermal melt crystallization kinetics of PVDF was investigated by differential scanning calorimetry. Thin PVDF film has been fabricated by the solvent casting technique using dimethylformamide (DMF). Then, the samples were melted and subsequently crystallized in the range of the crystallization temperature (Tc) between 138 and 145 °C. The crystallization kinetics was derived from Avrami equa...
متن کاملOptimal Control of Melt Spinning Processes
An optimal control problem for a mathematical model of a melt spinning process is considered. Newtonian and non–Newtonian models are used to describe the rheology of the polymeric material, the fiber is made of. The extrusion velocity of the polymer at the spinneret as well as the velocity and temperature of the quench air serve as control variables. A constrained optimization problem is derive...
متن کاملEnhanced Hydrogen Storage Kinetics of Nanocrystalline and Amorphous Mg2Ni-type Alloy by Melt Spinning
Mg₂Ni-type Mg₂Ni1-xCox (x = 0, 0.1, 0.2, 0.3, 0.4) alloys were fabricated by melt spinning technique. The structures of the as-spun alloys were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The hydrogen absorption and desorption kinetics of the alloys were measured by an automatically controlled Sieverts apparatus. The electrochemical hydrogen storage kine...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2008
ISSN: 1742-6588,1742-6596
DOI: 10.1088/1742-6596/98/5/052011