CT Scanning Imaging Method Based on a Spherical Trajectory
نویسندگان
چکیده
منابع مشابه
CT Scanning Imaging Method Based on a Spherical Trajectory
In industrial computed tomography (CT), the mismatch between the X-ray energy and the effective thickness makes it difficult to ensure the integrity of projection data using the traditional scanning model, because of the limitations of the object's complex structure. So, we have developed a CT imaging method that is based on a spherical trajectory. Considering an unrestrained trajectory for ite...
متن کاملINTRATHORACIC KIDNEY: A CT-SCANNING VIEW
We report a patient who was admitted to the department of medicine with palpitation, dyspnea and left flank pain, Chest X-ray revealed a mass in the left lung. The lesion was evaluated as a pulmonary tumor, with a high suspicion of malignancy. Intravenous urography, sonography, and CTscanning revealed a thoracic kidney at the location previously thought to be a lung mass. This is the firs...
متن کاملVarying-energy CT imaging method based on EM-TV
For complicated structural components with wide x-ray attenuation ranges, conventional fixed-energy computed tomography (CT) imaging cannot obtain all the structural information. This limitation results in a shortage of CT information because the effective thickness of the components along the direction of x-ray penetration exceeds the limit of the dynamic range of the x-ray imaging system. To ...
متن کاملA novel dual energy CT-based attenuation correction method in PET/CT systems: A phantom study
In present PET/CT scanners, PET attenuation correction is performed by relying on the information given by CT scan. In the CT-based attenuation correction methods, dual-energy technique (DECT) is the most accurate approach, which has been limited due to the increasing patient dose. In this feasibility study, we have introduced a new method that can implement dual-en...
متن کاملAn Indirect Method to Measure Abutment Screw Preload: A Pilot Study Based on Micro-CT Scanning.
This study aimed to measure the preload in different implant platform geometries based on micro-CT images. External hexagon (EH) implants and Morse Tapered (MT) implants (n=5) were used for the preload measurement. The abutment screws were scanned in micro-CT to obtain their virtual models, which were used to record their initial length. The abutments were screwed on the implant with a 20 Ncm t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: PLOS ONE
سال: 2016
ISSN: 1932-6203
DOI: 10.1371/journal.pone.0149779