Cure-induced residual stresses for warpage reduction in thermoset laminates
نویسندگان
چکیده
منابع مشابه
On the Calculation of Energy Release Rates for Cracked Laminates with Residual Stresses
Prior methods for calculating energy release rate in cracked laminates were extended to account for heterogeneous laminates and residual stresses. The method is to partition the crack tip stresses into local bending moments and normal forces. A general equation is then given for the total energy release rate in terms of the crack-tip moments and forces and the temperature difference experienced...
متن کاملAn Analytical Model for Shot-Peening Induced Residual Stresses
To improve the fatigue life of metallic components, especially in aerospace industry, shot peening is widely used. There is a demand for the advancement of numerical algorithms and methodologies for the estimation of residual stresses due to shot peening. This paper describes an analytical model to simulate the shot peening process and to estimate the residual stress field in the surface layer....
متن کاملSurface Workhardening and Residual Stresses Induced by Micro Cutting Processes
X-ray diffraction, optical microscopy and microhardness testing have been used to study properties which develop in micro-cut AISI 1045 steel. The influence of the ploughing effect on residual stresses, surface deformation and work hardening, and the tool quality were investigated. Tensile residual stresses, caused by the heat generated in the material during the cutting process, were observed ...
متن کاملPrediction of Residual Stresses for a Hollow Product in Cold Radial Forging Process
Radial forging is an open die forging process used for reducing the diameters of shafts, tubes, stepped shafts and axles and also for creating internal profiles such as rifling the gun barrels. The radial forging of tube is usually performed over a mandrel to create an internal profile and/or size the internal diameter. Most of the previous studies conducted on the radial forging process have u...
متن کاملResidual Stresses Measurement in Hollow Samples Using Contour Method
Residual stresses are created usually undesirably during manufacturing processes, including casting, welding, metal forming, etc. Residual stresses alone or in combination with other factors can cause the destruction and fracture of components or significant decline in their service life. Therefore, it is crucial to measure the residual stresses. Contour method is a destructive testing method c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Composite Materials
سال: 2020
ISSN: 0021-9983,1530-793X
DOI: 10.1177/0021998320908631