Curing Process of Epoxy Resin with Tertiary Amine
نویسندگان
چکیده
منابع مشابه
Effect of cure cycle on curing process and hardness for epoxy resin
A 3-dimensional finite element model is developed to simulate and analyze the temperature and degree of cure field of epoxy casting part during cure process. The present model based on general finite element software ABAQUS is verified by literature example and experimental data. The numerical results show good agreement with literature example and measured data, and are even more accurate than...
متن کاملSelf-curing with epoxy groups
Isocyanate-free cathodic ED coatings. Most of the resins used in the cathodic electrodeposition (CED) coatings are made from modified epoxy resin and blocked polyisocyanate in which the crosslinking is achieved by polyurethane and polyurea formation. A resin system has been developed that is isocyanate free and avoids not only the toxicity aspect, but also, to a great extent, the weight loss of...
متن کاملHardness of composite resin polymerized with different light-curing units
Introduction: The degree of polymerization depends on the type of light-curing unit. The aim of this study was to compare the hardness of composite resin cured by LED and Halogen light curing units. Methods: In this experimental study, 20 cylindrical samples of Tetric Ceram composite were prepared. Half of them were cured with Ultralume 2 LED and the other half with Astralis 7 Halogen light ...
متن کاملCatalyzed Synthesis and Characterization of a Novel Lignin-Based Curing Agent for the Curing of High-Performance Epoxy Resin
In this study, lignin, an aromatic compound from the forestry industry, was used as a renewable material to synthesize a new aromatic amine curing agent for epoxy resin. Firstly, lignin was separated from black liquor and hydroxyl groups were converted to tosyl groups as leaving groups. Then, primary amination was conducted using an ammonia solution at high pressure and temperature, in the pres...
متن کاملEffect of curing agent and temperature on the rheological behavior of epoxy resin systems.
The effect of curing agent (6610) content and temperature on the rheological behavior of the epoxy resin CYD-128 was studied by DSC analysis and viscosity experiments. The results show that the resin system meets the requirements of processing technology. A complete reaction occurs when the curing agent content (40 parts per hundred resin, phr) is a little higher than the theoretical value (33....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of the Society of Chemical Industry, Japan
سال: 1962
ISSN: 0023-2734,2185-0860
DOI: 10.1246/nikkashi1898.65.5_827