Cutting edge of diamond turning tools.
نویسندگان
چکیده
منابع مشابه
Wear behavior of ZrAlN coated cutting tools during turning
In this study we explore the cutting performance of ZrAlN coatings. WC:Co cutting inserts coated by cathodic arc evaporated Zr1-xAlxN coatings with x between 0 and 0.83 were tested in a longitudinal turning operation. The progress of wear was studied by optical microscopy and the used inserts were studied by electron microscopy. The cutting performance was correlated to the coating composition ...
متن کاملOn Stress Analysis of Diamond Coating Cutting Tools
Diamond coatings have been increasingly used in cutting tools applications. Coating delamination is the major tool failure mode and occurs due to deposition-induced residual stresses and thermomechanical loading in machining. This study applies finite element analysis to investigate stress distributions, with the edge radius focused, in diamond coating tools considering depositions and machinin...
متن کاملCharacterizations of nano-crystalline diamond coating cutting tools
Diamond coatings made by processes such as chemical vapor deposition (CVD) have been increasingly explored for cutting tools applications, in particular, for machining lightweight high-strength materials. However, most literature to date reported that the wear resistance of CVD diamond tools is still distant to the polycrystalline diamond (PCD) counterparts. Recently, a microwave plasma-assiste...
متن کاملElliptical Vibration Cutting of Steel with Diamond Tools
Diamond turning of steel alloys is impractical due to catastrophic tool wear caused by a combination of chemical and abrasive wear. In the literature, several modifications of the cutting process have been proposed, e.g. cutting in an inert gas atmosphere, cryogenic cutting and vibration assisted cutting, e.g. elliptical vibration cutting (EVC) [1-5]. In this work, the EVC method was investigat...
متن کاملCVD diamond coatings on geometrically complex cutting tools
The manufacturing of chemical vapour deposition (CVD) diamond coated shaft type cutting tools is demanding due to the complex design of the cutting edges and the cobalt content of the cemented carbide. The influencing parameters of substrate, pre-treatment and diamond film on the tool cutting performance are discussed. The optimised manufacturing route of CVD diamond coated thread milling drill...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 1988
ISSN: 1882-675X,0912-0289
DOI: 10.2493/jjspe.54.2052