Cutting Mechanism on Ultrasonic Vibration Cutting (3rd Report)
نویسندگان
چکیده
منابع مشابه
vibration cutting and elliptical ultrasonic vibration assisted turning of in738 work-pieces
vibration cutting (vc), elliptical vibration cutting (evc) and ordinary cutting (oc) of in738 work-pieces have been experimentally investigated in the present research. the experiments were carried out by using single crystal diamond tool and ultra-precision cnc lathe. vibration frequency is 36.16khz and the amplitude is . the influence of various cutting parameters including cutting speed, fee...
متن کاملMirror Surface Finishing of Hardened Die Steel by High-power Ultrasonic Elliptical Vibration Cutting
Ultrasonic elliptical vibration cutting has recently been utilized in industry for finishing of various precision parts such as mirror surface finishing and precision micro machining of dies and molds. However, its application has been limited to high-cost ultra-precision machining, where depth of cut is typically in a range from a few micrometers to several tens of micrometers due to power lim...
متن کاملStriation Mechanism in Laser Cutting – the Review
High-power laser cutting is extensively used in many industrial applications.The quality of a laser-made cut is of the utmost importance in laser processing. Any improvements in this area would be of considerable significance, in that it would lead to an elimination of post-machining operations. Although there have been numerous techniques developed over the years, currently there are few appro...
متن کاملCutting Mechanism of Sulfurized Free-Machining Steel
In order to improve efficiency of cutting process in production industry, development of new steel which has good machinablity is desired. The work material which has good surface roughness, easy breakable chip and small tool wear as the good machinablity is expected. And the free-machining steel was developed owning to adding elements which could make the machinablity better. Of all others, le...
متن کاملCutting ability of an ultrasonic retrograde cavity preparation instrument.
The aim of this study was to investigate the cutting ability of a working ultrasonic instrument designed for surgical endodontic use (Neosonic, Amadent Corp, Cherry Hill, NJ, USA). Three designs of tip, designated CT 1 to CT 3 were calibrated by measuring their displacement amplitudes in air using light microscopy over a range of power settings. Extracted teeth were sectioned longitudinally and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering, Contributed Papers
سال: 2005
ISSN: 1881-8722,1348-8724
DOI: 10.2493/jspe.71.1005