Cutting performance of micro-textured PCBN tool
نویسندگان
چکیده
منابع مشابه
3-d Fea of Hard Turning: Investigation of Pcbn Cutting Tool Micro- Geometry Effects
In this study, 3-D finite element modeling of precision hard turning has been used to investigate the effects of cutting edge microgeometry on tool forces, temperatures and stresses in machining of AISI H13 steel using polycrystalline cubic boron nitrite (PCBN) inserts with two distinct edge preparations. Hard turning experiments were conducted to investigate the effects of cutting edge geometr...
متن کاملInvestigation of Micro Square Structure Fabrication by Applying Textured Cutting Tool in WEDM
This paper studies micro structure fabrication by means of a textured tool cutting edge, which is manufactured by applying the wire cut electrical discharge machining (WEDM). Machining performance of the square structure fabrication on the tool cutting edge is investigated in the WEDM process, and the machining accuracy is explored in experimental analyses. In this proposed method, undesired ov...
متن کاملWear and tool life of tungsten carbide, PCBN and PCD cutting tools
The wear mechanisms of cutting tools made of tungsten-carbide (WC), PCBN and PCD were investigated using the tool life and temperature results available in the literature. For tool/work combinations WC/steel and PCBN/hardened-steel, under practical conditions, tool wear was found to be greatly influenced by the temperature. It was concluded that the most likely dominant tool wear mechanism for ...
متن کاملImproved metal cutting performance with biasmodulated textured Ti0.50Al0.50N multilayers
In this work we present the cutting performance of Ti0.50Al0.50N coatings which have been deposited with both a fixed and an alternating bias of -35 V and -70 V together with a Ti0.33Al0.67N reference coating grown at -35 V. During deposition of the bias-layered coatings, the bias was instantaneously changed with four different bias-layer periods ranging from approximately 250 to 1500 nm. For t...
متن کاملThe mechanism governing cutting of Polycrystalline Cubic Boron Nitride (PCBN) tool blanks with phase transformation induced fracture
The thesis presents a combined experimental and computational investigation of a novel thermochemical material removal mechanism for cutting of polycrystalline cubic boron nitride (PCBN) substrates through controlled crack propagation. The CO2-Laser/Waterjet machining system developed by the Iowa State University’s Laboratory for Lasers, MEMS, and Nanotechnology was utilized to achieve specimen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nanotechnology and Precision Engineering
سال: 2021
ISSN: 1672-6030,2589-5540
DOI: 10.1063/10.0004372