Cutting Process of Ceramics with Diamond Wheel
نویسندگان
چکیده
منابع مشابه
Comparison of Cutting Ceramics with Hard Metal Cutting Tools
Cutting ceramic tools are used especially at high cutting speeds in the machining process. The highly brittle type of structure and the tendency for cleavage (crack formation) are the infavorable properties of these materials, which keep their hardness at high temperatures. The hard metals are produced by sintering of the carbides such as whisker WC, TiC and TaC with the presence of Co as a bin...
متن کاملCombining fuzzy RES with GA for predicting wear performance of circular diamond saw in hard rock cutting process
Predicting the wear performance of circular diamond saw in the process of sawing hard dimensional stone is an important step in reducing production costs in the stone sawing industry. In the present research work, the effective parameters on circular diamond saw wear are defined, and then the weight of each parameter is determined through adopting a fuzzy rock engineering system (Fuzzy RES) bas...
متن کاملNumerical simulations and cutting experiments on single point diamond machining of semiconductors and ceramics
This chapter presents numerical simulation work and single-point nano-machining experiments conducted on semiconductor and ceramic materials, e.g. silicon (Si) and silicon carbide (SiC). The apparent ductile mode material removal mechanism observed in these materials is believed to be the result of a high pressure phase transformation (HPPT), which generates a small Correspondence/Reprint reque...
متن کاملRevolution in Diamond Cutting: Laser Sawing of Diamond Crystals
Laser sawing of diamonds is beginning to revolutionize the diamond-cutting industry. Not only does the laser saw offer savings in time and money, but it also enables the cutting of material virtually unworkable by conventional methods and makes available an almost limitless assortment of fancy shapes. This article describes the components and operation of the laser saw, as well as the situation...
متن کاملElliptical Vibration Cutting of Steel with Diamond Tools
Diamond turning of steel alloys is impractical due to catastrophic tool wear caused by a combination of chemical and abrasive wear. In the literature, several modifications of the cutting process have been proposed, e.g. cutting in an inert gas atmosphere, cryogenic cutting and vibration assisted cutting, e.g. elliptical vibration cutting (EVC) [1-5]. In this work, the EVC method was investigat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Association, Japan
سال: 1982
ISSN: 0009-0255,1884-2127
DOI: 10.2109/jcersj1950.90.1039_138