CVD carbon powders modified by ball milling
نویسندگان
چکیده
منابع مشابه
EVect of high energy ball milling on titanium– hydroxyapatite powders
to bone are concerned are brittle materials as exempli ed by hydroxyapatite and ‘Bioglass’. Bioactive coatings are This paper reports on an investigationof the potential employed on metal implants to facilitate bonding to bone use of high energy ball milling (HEBM) for the while retaining the good combination of mechanical production of homogeneous mixtures of titanium/ properties associated w...
متن کاملSintering and Characterizations of WC-20wt.% (Fe,Co) Nano-Structured Powders Developed by Ball-Milling
The aim of the present work is to study the effects of the nanostructured WC-20 wt. % (Fe,Co) with different ratios of iron to cobalt on the microstructure and hardness of sintered samples. Furthermore, a sample with a cobalt binder under the same condition was produced for the comparison purposes. The nanocomposite development, after different milling times, has been monitored by means of X-ra...
متن کاملThe crystallization process of amorphous Al80Fe20 alloy powders prepared by ball milling
The amorphous-to-crystalline transition during thermal annealing of amorphous Al80Fe20 alloy powders prepared by ball milling was investigated by means of magnetothermal analysis and X-ray diraction. Following structural relaxation and stress relief processes, a metastable phase precipitates during primary crystallization, and a mixture of intermetallic compound (h-Al13Fe4) and fcc Al is devel...
متن کاملPreparation of Property-Controlled Bi-Based Solder Powders by a Ball-Milling Process
Three kinds of Bi-based solder powders with different chemical compositions of binary Bi–Sn, ternary Bi–Sn–In, and quaternary Bi–Sn–In–Ga were prepared using a gas atomization process and subsequently ball-milled for smaller-size fabrication. In particular, only the quaternary Bi–Sn–In–Ga solder powders were severely broken to the size of less than 10 μm in a polyhedral shape due to the presenc...
متن کاملDefects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling
Nano fillers are part of new studies to enhance various properties of fluids and solids. For example, adding nanoparticles as an enforcement in nanocomposites or as an additive to improve thermal or electrical properties in nano-fluids are of extreme importance in science and industry. There are numerous methods to uniformly disperse nanoparticles in fluid and solid phase. One of the well-used ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science-Poland
سال: 2015
ISSN: 2083-134X
DOI: 10.1515/msp-2015-0072