Cyclic Behavior and Modeling of Bolted Glulam Joint with Cracks Loaded Parallel to Grain
نویسندگان
چکیده
منابع مشابه
Shear Resistance of Glulam Beams with Cracks
A reduction of the shear resistance was introduced with the crack factor kcr in Eurocode 5. The factor 0.67 corresponds to cracks that have a depth of 1/3 of the beam width, which rarely occurs under normal conditions. The glulam industry in Sweden has not observed any problems or shear failures due to cracks with previously used shear values. Hence the design requirements do not seem reasonabl...
متن کاملNumerical Analysis of Cyclic Behavior of Beam-To-Column Bolted Connections in Steel Frames
This article considers the seismic behavior of beam-to-column joints in steel frames for different bolt arrangements by using of finite element modeling. As the most important beam-to-column joint type, the beam-to-column joints with end-plate is chosen for the analysis. Four different specimens have been analyzed. These models had some differences such as bolt arrangement and the presence or a...
متن کاملa comparison of teachers and supervisors, with respect to teacher efficacy and reflection
supervisors play an undeniable role in training teachers, before starting their professional experience by preparing them, at the initial years of their teaching by checking their work within the proper framework, and later on during their teaching by assessing their progress. but surprisingly, exploring their attributes, professional demands, and qualifications has remained a neglected theme i...
15 صفحه اولnumerical analysis of cyclic behavior of beam-to-column bolted connections in steel frames
this article considers the seismic behavior of beam-to-column joints in steel frames for different bolt arrangements by using of finite element modeling. as the most important beam-to-column joint type, the beam-to-column joints with end-plate is chosen for the analysis. four different specimens have been analyzed. these models had some differences such as bolt arrangement and the presence or a...
متن کاملDetection of Fatigue Cracks and Torque Loss in Bolted Joints
Fatigue crack growth during the service life of aging aircraft is a critical issue and monitoring of such cracks in structural hotspots is the goal of this research. This paper presents a procedure for classification and detection of cracks generated in bolted joints which are used at numerous locations in aircraft structures. Single lap bolted joints were equipped with surface mounted piezoele...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Civil Engineering
سال: 2021
ISSN: 1687-8094,1687-8086
DOI: 10.1155/2021/6612886