Cyclic fatigue effect in particulate ceramic composites

Modeling Cyclic Fatigue Hysteresis Loops of 2D Woven Ceramic Matrix Composites at Elevated Temperatures in Steam

In this paper, the cyclic fatigue hysteresis loops of 2D woven SiC/SiC ceramic matrix composites (CMCs) at elevated temperatures in steam have been investigated. The interface slip between fibers and the matrix existing in matrix cracking modes 3 and 5, in which matrix cracking and interface debonding occurred in longitudinal yarns, is considered as the major reason for hysteresis loops of 2D w...

Fatigue cyclic loading test of an auro-galvanoforming ceramic bridge.

BACKGROUND In dental clinics, dentition defects are commonly restored with conventional porcelain-fused-to-metal fixed bridges. However, Ni-Cr alloy ceramic fixed bridges are known to have several drawbacks such as marginal coloration of the neck, low casting precision and, most seriously, poor biocompatibility. These problems could be circumvented by using noble metal ceramic bridges; however,...

Fatigue crack growth resistance in SiC particulate and whisker reinforced P/M 2124 aluminum matrix composites

Fatigue crack growth is examined in P/M 2124 aluminum alloys reinforced with SiC particles (SiCp) and whiskers (SiCw) over a wide spectrum of growth rates from 10 to 10 m per cycle. Effects of aging treatment, orientation of crack growth direction with respect to the rolling direction, mean stress (or stress ratio), and reinforcement volume percent on the fatigue crack growth threshold are inve...

Bio-inspired Ceramic/carbon Composites

Microwave Heating of Ceramic Composites

The microwave heating of a ceramic composite is modelled and analysed. The composite consists of many small ceramic particles embedded in a ceramic cement. The composite is assumed to be well insulated, and each particle is assumed to be in imperfect thermal contact with the surrounding cement. Based on these two assumptions an asymptotic theory exploiting the small Biot number and small non-di...