Cyclic Superelastic Behavior of Iron-Based Fe-Ni-Co-Al-Ti-Nb Shape Memory Alloy

نویسندگان

چکیده

Abstract Iron-based shape memory alloys came into focus as promising candidate materials for large-scale structural applications owing to their cost-efficiency. In the present work, superelastic properties of a recently introduced Fe-Ni-Co-Al-Ti-Nb alloy are investigated. For 〈001〉-oriented single-crystalline material in aged condition (650 °C/6 h), an incremental strain test reveals excellent superelasticity at −130 °C with fully reversible strains up about 6%. Under cycling loading different temperatures, however, system investigated suffers limited functional stability.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Superelastic Behavior under Cyclic Loading for Coil Spring of Ti-Ni Shape Memory Alloy

The superelastic behavior of coil springs of a Ti-Ni shape memory alloy was investigated using loading-unloading cycling tests under isothemal temperatures. The effects of the Ni content and shape memory treatment temperatures on the cyclic behavior in the superelastic deformation were investigated. The deformation behavior within the elastic region of the parent phase scarcely changes during t...

متن کامل

Internal Friction in Fe-Co-Ni-Ti Shape Memory Alloys

The anomalies of the temperature dependences of the logarithmic decrement and eigen frequency of the free damped vibrations for Fe-Co-Ni-Ti shape memory alloys were first found in the vicinity of the reverse ay martensitic transformation. It was shown the damping capacity in the alloys investigated is comparable with that for TiNi based alloys.

متن کامل

Dental casting of superelastic Ni-Ti alloy.

Rods of Ni-43.5wt% Ti alloy were prepared under various casting conditions. Specimens which were melted in a cordierite crucible and cast in a phosphate-bonded investment mold had less strength and elongation than those melted in a copper crucible and cast in a phosphate-bonded investment mold. All castings exhibited superelasticity at room temperature. The upper limit of recoverable strain was...

متن کامل

Fatigue properties of Ni-43.5%Ti superelastic alloy castings.

To evaluate a Ni-43.5wt%Ti alloy as a new alloy for cast clasp, the fatigue properties of its castings were examined and compared with those of Co-Cr and Type IV Au alloys castings. The Ni-Ti alloy was cast into a phosphate-bonded investment mold using an argon-arc melting and pressure casting machine. The Ni-Ti alloy castings showed superelasticity in bending tests. Fatigue tests were carried ...

متن کامل

Investigation of the martensitic transformation and the damping behavior of a superelastic Ti-Ta-Nb alloy

In this study the α′′ stress-induced martensitic transformation and damping behaviour of the superelastic β-Ti–25Ta–25Nb alloy are investigated by tensile tests at room temperature and by dynamic mechanical analysis (DMA) in tensile mode for different applied stresses. Tensile tests show a fully non-linear elastic domain and, consequently, a specific method is proposed to determine the elastic ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Materials Engineering and Performance

سال: 2023

ISSN: ['1544-1024', '1059-9495']

DOI: https://doi.org/10.1007/s11665-022-07745-w