Damage assessment on frame structure with bolted joints based on experimental modal analysis
نویسندگان
چکیده
منابع مشابه
Bolted Timber Joints with Self-tapping Screws
The use of self-tapping screws with continuous threads in the joint area as a reinforcement to avoid splitting of timber members is studied. A theoretical model is developed to calculate the stress distribution around a pin-loaded hole in a timber joint, to predict brittle failure modes in bolted connections and to calculate the load in the reinforcing screws. Laboratory experiments on reinforc...
متن کاملDiscussion on Damage Detection of A 3-D Frame Structure Using Modal Strain Energy Change
A structural damage detection method based on modal strain energy change (MSEC) is applied to a 3D steel frame structure tested in the laboratory. Very limited measurement is available to be expanded to the full dimension of the FEM of the test structure. Both numerical and experimental studies are performed in this study, and the result shows that the damage locations are successfully identifi...
متن کاملBolted Joints in Laminated Composites
Expressions were presented which can be used to estimate the strengths of continuous fiber reinforced composite laminates containing pin-loaded holes. The expressions apply to laminates containing either a single pin loaded hole, a single row of pin loaded holes, or two parallel rows of pin loaded holes.
متن کاملInvestigation and Analysis of Empirical Field Seismic Damage to Bottom Frame Seismic Wall Masonry Structure
To understand the seismic damage characteristics of bottom frame-wall buildings and to study their seismic performance, the seismic damage outcomes of bottom frame-wall structures in Du jiang weir by the Wen chuan earthquake on May 12,2008, China were field observed and studied. The assesment of the seismic damage to the bottom frame-wall masonry in Du jiang weir urban showed that the damage t...
متن کاملIdentification of Bolted Joints through Laser Vibrometry
We present a new technique for identifying the dynamics of bolted joints. The technique relies on the comparison of the overall dynamics of the bolted structure to that of a similar but unbolted one. The di!erence in the dynamics of the two systems can be attributed solely to the joint; modelling this di!erence in the dynamics enables us to construct a non-parametric model for the joint dynamic...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2019
ISSN: 1757-899X
DOI: 10.1088/1757-899x/469/1/012102