Damage-control evaluation of high-strength steel frames with energy dissipation bays
نویسندگان
چکیده
منابع مشابه
Earthquake Response Evaluation of RC Frames using High Strength Steel
To achieve better structural performance, lesser damage along with minimum residual displacements is a main objective of earthquake resistant design. In ordinary steel reinforced concrete frames, chances of severe damage because of the lower strength of conventional steel are always present during strong earthquakes. With the invention of high-strength steel (HSS) it can be anticipated that its...
متن کاملBond of High Strength Concrete with High Strength Reinforcing Steel
This paper presents a study about the bond of high strength concrete with high strength steel. Fourteen pull out tests were carried out to determine the bond. The concrete strength was about 70 MPa and the steel was a 500 MPa grade. Bar diameters used were 12, 16, 20, 25, 28, 32 and 36 mm. In order to investigate the effect of cover, each test was done twice, once in a 240 mm diameter concrete ...
متن کاملEnergy Dissipation Bracing Systems in Steel Frames Using FRP Composite Materials
Passively damped bracing systems in steel frames, in which the conventional materials of the joint are replaced by high damping viscoelastic materials, have the potential of being effective practical means for passive vibration control of dynamically loaded civil engineering structures. However, this potential can be realized only if the associated structural penalties are reduced within accept...
متن کاملEnergy Dissipation Criteria for Surface Contact Damage Evaluation
This chapter presents the energy dissipation approach for analyzing surface contact damages in various materials, including composite materials. As known, surface contact is a very common phenomenon, which can be found in daily life and many scientific and engineering problems. The contact of different bodies can be modeled as indentation. Analysis of indentation and modeling of the deformation...
متن کاملEvaluation of Damage Distribution in Elements of Dual Frames
Researches show that the strength criterion is inadequate for design of structures against seismic loads. Since structures yield and experience plastic deformation under strong ground motion, considering structural damage with inelastic behavior may be a considerable criterion for design and control of the structures.In this paper, three steel structures with dual system consisting of intermedi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of the Institution of Civil Engineers - Structures and Buildings
سال: 2017
ISSN: 0965-0911,1751-7702
DOI: 10.1680/jstbu.16.00098